User manual HILTI TE2-A

[. . . ] TE 2-A Operating instructions Mode d'emploi Manual de instrucciones en fr es 304444 *304444* 1 9 1 2 34 5 8 6 7 UL listed and CSA certified according to US and Canadian safety standards Homologué (conforme aux normes de sécurité américaines et canadiennes) Producto homologado según normas de seguridad americanas y canadienses Produto homologado de accordo com as normas de segurança americanas e canadianas C US C US TE2-A cordless rotary hammer It is essential that the operating instructions are read before the tool is operated for the first time. Always keep these operating instructions together with the tool. Ensure that the operating instructions are with the tool when it is given to other persons. 1. General information 1. 1 Signal words and their meaning -WARNINGThe word WARNING is used to draw attention to a potentially dangerous situation which could lead to severe personal injury or death. [. . . ] It is intended for use on construction sites of all kinds for general construction, interior finishing, conversion and renovation work. The tool is designed for continuous use. The tool may be used only in a dry environment. Do not use the tool where there is a risk of fire or explosion. Use only the insert tools and accessories intended for use with this tool. The batteries are to be used exclusively to power tools of the Hilti 24V line. Use only the recommended battery charger. Modification or manipulation of the tool other than described in these operating instructions is not permissible. To avoid the risk of injury, use only original Hilti accessories and additional equipment. It is essential that the safety precautions printed in these operating instructions are read and observed. It is essential that a new battery is charged correctly when charged for the first time before initial use. Incorrect initial charging can lead to a permanent reduction of battery capacity. ­ With the C 7/24 charger: Charge for 24 hours in normal charging mode or for 12 hours in conditioning mode. ­ With the C 7/36-ACS charger: The charger detects automatically whether initial charging or normal charging is necessary. -NOTEThe tool may be used only with B24/2. 0 NiCd, B24/2. 4 NiCd or B24/3. 0 NiMH batteries. Battery performance drops at low temperatures. Batteries should be stored at room temperature. 6. 1 Fitting the side handle (option) -NOTEAn adjustable side handle (option) may be fitted in addition to the two integrated grips. The side handle permits the tool to be held more securely and thus more comfortably, particularly in the event of inadvertently drilling into a reinforcing bar. Slacken the side handle clamping band by turning the side handle in a counterclockwise direction. Slide the side handle clamping band over the chuck and onto the front section of the tool. Bring the side handle into the desired position. Secure the side handle by turning it in a clockwise direction. 7. Operation -CAUTION Noise is emitted by the tool and the drilling or screwdriving procedure. [. . . ] This warranty is valid so long as the tool is operated and handled correctly, cleaned and serviced properly and in accordance with the Hilti Operating Instructions, all warranty claims are made within 12 months from the date of the sale (invoice date), and the technical system is maintained. This means that only original Hilti consumables, components and spare parts may be used in the tool. This warranty provides the free-of-charge repair or replacement of defective parts only. Parts requiring repair or replacement as a result of normal wear and tear are not covered by this warranty. [. . . ]