User manual HILTI WSR 1400-PE

[. . . ] 12 Hilti Corporation FL-9494 Schaan Tel. : +423 / 234 2111 Fax: +423 / 234 29 65 www. hilti. com WSR 900 WSR 900-PE WSR 1250-PE WSR 1400-PE Operating instructions Mode d'emploi Manual de instrucciones en fr es V V V 13 14 V 15 16 V Hilti = registered trademark of Hilti Corp. , Schaan W 2827 0704 5-Pos. 3 1 Printed in Liechtenstein © 2004 Right of technical and programme changes reserved S. & O. 376750 376750 / C *376750* 1 1 3 4 5 2 8 B 9 min. 25mm W SR 90 0PE WS R 14 00 WSR 900 WS -PE R 12 50 6 12 11 10 9 8 -PE A 7 1 2 3 4 5 3 min. 40mm 10 WS R 900 -PE WSR 1250- PE WSR 900-PE 6 WS R 140 0-P E WSR 1400-P E 12 11 10 9 8 1 2 7 4 4 min. 40mm min. 40mm WSR 1250-PE 5 WSR 1400-P E WSR 900 / WSR 900-PE WSR 1400-PE 12 11 10 9 1 8 2 7 6 3 45 This product is UL listed and CSA certified to US and Canadien safety standards Ce produit est homologué UL et certifié CSA (conforme aux normes de sécurité américaines et candiennes) Producto homologado según normas de seguridad americanas y canadienses Produto homologado de accordo com as normas de segurança americanas e canadianas C US C R US 5 6 7 1­ 6 2 3 11 WSR 1400-PE WSR1250-PE / WSR1400-PE UL listed to US and Canadien safety standards Homologué UL (conforme aux normes de sécurité américaines et candiennes) Producto homologado según normas de seguridad americanas y canadienses Produto homologado de accordo com as normas de segurança americanas e canadianas 12 11 10 9 8 7 6 C R US WS R 14 00 -P E WSR 1400-PE WSR 900 / WSR 900-PE / WSR1250-PE / WSR1400-PE reciprocating saw It is essential that the operating instructions are read before the tool is operated for the first time. Always keep these operating instructions together with the tool. [. . . ] The tool is designed for two-handed operation. Use only the blades and accessories listed in the operating instructions. en Do not use the tool to cut bricks, concrete, cellular concrete, natural stone or tiles. Use the tool within its intended cutting performance range and with suitable blades (do not use blades of the wrong size or reciprocating saw blades not equipped with a 1/2" connection end). Cutting materials containing asbestos is not permissible. Do not use the tool to cut concrete or natural stone. Use the tool within its intended cutting performance range and with suitable blades (do not use blades of the wrong size or reciprocating saw blades not equipped with a 1/2" connection end). Cutting materials containing asbestos is not permissible. 4. 2 Use of the WSR 1250-PE / WSR 1400-PE as directed Typical working environments include general construction, renovation and conversion work, metal construction, plumbing / heating / air-conditioning instal- 4. 3 The items supplied include: ­ Reciprocating saw and saw blade ­ Operating instructions ­ Toolbox See figure and the explanations of operating controls and components on page 1. Technical data Tool WSR 900 Nominal power rating 900 W Nominal voltage 120 V / 8. 5 A Nominal current input Mains frequency 50 / 60 Hz Weight of tool 6. 28 lbs (2. 85 kg) Dimensions 17. 4×3. 5×8. 3 in (L×B×H) (442×88×211 mm) Stroke rate 0­2700 min­1 Stroke 11/4 in (32 mm) WSR 900-PE 900 W 120 V / 8. 5 A WSR 1250-PE 1250 W 120 V / 12 A WSR 1400-PE 1400 W 120 V / 13 A 50 / 60 Hz 7. 2 lbs (3. 26 kg) 17. 4×3. 5×8. 3 in (442×88×211 mm) 0­2700 min­1 11/4 in (32 mm) 50 / 60 Hz 9. 3 lbs (4. 2 kg) 19. 4×4 ×7. 1 in (493×101×180 mm) 0­2700 min­1 11/4 in (32 mm) 50 / 60 Hz 9. 9 lbs (4. 5 kg) 22. 6×4×7. 4 in (574×101×188 mm) 0­2700 min­1 11/4 in (32 mm) 5 Stroke rate regulation Constant-speed electronics with variable stroke rate, stroke rate regulator with 6 pos. en Blade clamp Orbital action Double insulated Right of technical changes reserved Constant-speed elec- Constant-speed elec- Constant-speed electronics with variable tronics with variable tronics with variable stroke rate, stroke rate stroke rate stroke rate, stroke rate regulator with 6 pos. Keyless, for standard 1/2 blades on / off (only WSR 900-PE / WSR 1250-PE / WSR 1400-PE) Protection class II (double insulated) Z 5. Pull the blade out of the clamp toward the front of the tool. -NOTEThe electric supply voltage must comply with the information on the type plate. -CAUTION The cutting edges of the saw blade are sharp. The cutting edges may present a risk of injury. Moving parts may present a risk of injury. Wear protective gloves. 5. 3 Adjusting the contact shoe The contact shoe can be adjusted to provide optimum use of the blade length and to improve access in corners. Unplug the supply cord from the electric socket. Press the contact shoe lockbutton and hold it in this position. Slide the contact shoe forward or back into the desired position. Pull on the contact shoe to check that it has engaged. 5. 4 Using the pipe cutting adaptor (accessory) 1. Unplug the supply cord from the electric socket. Press the contact shoe lockbutton and hold it in this position. Pull the contact shoe away from the tool toward the front. Push the pipe cutting adaptor into the tool from the front until it is in the desired position. [. . . ] Turn the locking sleeve as far as it will go and remove the saw blade. Remove the saw blade (see 5. 2) and then remove the contact shoe. Press the lockbutton fully and remove the blade. Possible cause Fault in mains supply. en The tool does not achieve full power. No orbital action (only WSR 900-PE / WSR 1250 PE / WSR 1400-PE). [. . . ]