User manual HISENSE 55A7G

[. . . ] Before using the TV, please read this guide thoroughly and retain it for future reference. for more detailed Instructions, please see the User Manual or the E-Manual. This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. This symbol alerts user about the presence of important operating instructions and maintenance in the document enclosed in the package. [. . . ] To fully disconnect the TV, remove power plug from wall socket. Be sure to have the wall socket and power plug readily accessible. Figures and illustrations in this manual are provided for reference only and may differ from actual product appearance. Parts of the software function changes with the system upgrade. contents Accessories List1 Installing the Stand2 Installing the Wall Mount Bracket4 TV Front5 TV Rear6 Making Connections7 Remote Control 11 Turning the TV on for the First Time14 Specifications15 Other Information17 accessories List The following accessories are included with TV: The accessories may be different from the list above due to different models, countries/regions, please refer to the actual accessory bag. CAUTION Be sure to disconnect the AC power cord before removing a base stand or installing wall mount brackets. Make sure the TV screen is not scratched or damaged by hard objects or from pressure. After the installation is complete, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any. installing the Stand Follow the illustrations and textual instructions below to complete the installation steps: 1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the TV or scratching to the screen. Take out the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly. For 65"/75" Attention: According to the size of the TV supporting surface, you can select one of the base stand installation patterns, as shown in the figure. Before mounting the TV, remove the TV stand if you have already attached it, and make sure the wall mount bracket supports the weight of your TV. When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If it is not correctly mounted, the TV may fall and cause property damage or personal injury. Make sure the tilt angle between the TV screen and the vertical surface is no more than 15 degrees. Wall mount hole pattern (mm) Wall mount screw size Rear cover of the TV NOTES The diameter and length of the screws differ depending on the wall mount bracket model. Wall mount bracket is optional, your device may not have wall mount bracket, please refer to the actual accessories. Do not put anything near the sensor, as its function may be affected. Press it again to bring up the control menu and move the focus between different inputs. Long Standby / Source press the button to make a selection. [. . . ] The remote control can work at a distance of Up to 8 meters in front of the TV set. The remote control angle: taking the remote Sensor as an apex, 6 meters away, its controlled horizontal angle is within ±30°, while the vertical angle is within ±15°. The operating distance may vary depending on the brightness of the room. Disposal of this unit Product should not be damaged, dismantled or thrown in municipal waste. [. . . ]