User manual HITACHI POWER TOOLS DH24PB2 ELECTRIC TOOL PARTS LIST

[. . . ] Hitachi Power Tools ROTARY HAMMER Model DH 24PB2 1 2 3 4 5 6 7 8 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 52 53 54 55 56 57 58 59 60 56 61 62 64 65 42 43 44 45 46 47 48 49 50 51 41 40 38 12 13 14 15 11 9 10 LIST NO. [. . . ] 55, 56, 61 1 1 1 2 1 1 1 1 1 1 1 1 2 2 4 2 1 FOR THA, SYR, INA, KUW, IND, HKG, SIN 1 FOR VEN, USA, CAN 1 FOR FIN, NOR, SWE, DEN, ESP, GBR (230V), SUI, NZL, POL, HUN, AUS, SAF, KOR 1 FOR GBR (110V), TPE 1 FOR THA, SYR, INA, KUW, IND, HKG, SIN 1 FOR VEN, USA, CAN 1 FOR FIN, NOR, SWE, DEN, ESP, GBR (230V), SUI, NZL, POL, HUN, AUS, SAF, KOR 1 FOR GBR (110V), TPE 2 1 1 FOR VEN, TPE, GBR (110V), USA, CAN 1 2 FOR CORD 1 1 1 (CORD ARMOR D8. 8) 1 (CORD ARMOR D10. 1) FOR THA 1 (CORD ARMOR D10. 1) FOR SYR 1 (CORD ARMOR D8. 8) FOR SIN, KUW 1 (CORD ARMOR D10. 1) FOR VEN 1 (CORD ARMOR D8. 8) FOR NZL, AUS 1 (CORD ARMOR D8. 8) FOR INA, IND, KOR 1 (CORD ARMOR D8. 8) FOR USA, CAN 1 (CORD ARMOR D8. 8) FOR GBR (230V) 1 (CORD ARMOR D8. 8) FOR GBR (110V) 1 (CORD ARMOR D8. 8) FOR SUI 1 (CORD ARMOR D8. 8) FOR HKG * ALTERNATIVE PARTS -- 3 --- 360-648U ARMATURE ASS'Y 110V-120V 340-581C STATOR 110V-120V 322-790 999-088 308-536 306-945 322-838 322-826 322-821 322-827 322-828 322-829 322-822 322-830 322-831 322-823 322-825 322-820 994-273 981-373 953-327 938-051 500-390Z 500-239Z 500-245Z 500-424Z 500-394Z 500-408Z 500-235Z 500-249Z 500-446Z 500-454Z 500-391Z 500-440Z PUSHING BUTTON CARBON BRUSH (1 PAIR) SPRING TAPPING SCREW D3X10 BRUSH HOLDER INTERNAL WIRE (BROWN) INTERNAL WIRE (BROWN) CHOKE COIL (BROWN) CHOKE COIL (BROWN) INTERNAL WIRE (BLUE) INTERNAL WIRE (BLUE) CHOKE COIL (BLUE) CHOKE COIL (BLUE) SUPPORT (B) SWITCH (B) SWITCH (A) NOISE SUPPRESSOR TUBE (D) CORD ARMOR D8. 8 CORD ARMOR D10. 1 CORD CORD CORD CORD CORD CORD CORD CORD CORD CORD CORD CORD PARTS ITEM NO. 500-201Z 937-631 984-750 301-653 322-833 CORD CORD CLIP TAPPING SCREW (W/FLANGE) D4X16 TAPPING SCREW (W/FLANGE) D4X20 (BLACK) DH 24PB2 DESCRIPTION NO. USED REMARKS 1 (CORD ARMOR D10. 1) FOR TPE 1 2 2 1 HANDLE COVER -- 4 --- * ALTERNATIVE PARTS 4 -- 04 STANDARD ACCESSORIES ITEM NO. 322-706 303-659 303-709 310-331 303-624 CASE SIDE HANDLE DEPTH GAUGE DEPTH GAUGE CHUCK ADAPTER (D) (SDS PLUS) DESCRIPTION NO. USED DH 24PB2 REMARKS 1 1 1 1 FOR USA, CAN 1 FOR AUS OPTIONAL ACCESSORIES ITEM NO. 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 4 -- 04 CODE NO. 980-927 981-840 308-471 306-885 306-910 971-787 931-844 321-814 995-344 321-813 DESCRIPTION GREASE FOR HAMMER. HAMMER DRILL (500G) GREASE (A) FOR HAMMER. [. . . ] 608 1 1 1 1 1 1 1 1 1 1 1 CHUCK WRENCH 10G ANCHOR SETTING ADAPTER A (SDS+) W5/16X260L ANCHOR SETTING ADAPTER A (SDS+) W3/8X160L ANCHOR SETTING ADAPTER A (SDS+) W3/8X260L ANCHOR SETTING ADAPTER B (SDS+) W1/4X260L ANCHOR SETTING ADAPTER B (SDS+) W5/16X260L ANCHOR SETTING ADAPTER B (SDS+) W3/8X160L ANCHOR SETTING ADAPTER B (SDS+) W3/8X260L HAMMER DRILL CHUCK SET 13MM CHUCK HANDLE RUBBER CAP SPECIAL SCREW M6X22 TAPER SHANK ADAPTER (SDS PLUS) NO. 2 A-TAPER SHANK ADAPTER (SDS PLUS) B-TAPER SHANK ADAPTER (SDS PLUS) SPECIAL SCREW M6X22 CORE BIT SHANK (SDS PLUS) 45-90MM 300L CORE BIT SHANK (SDS PLUS) 25-38MM 105L CORE BIT SHANK (SDS PLUS) 25-38MM 300L CHUCK ADAPTER (D) (SDS PLUS) CHUCK ADAPTER (G) (SDS PLUS) DRILL CHUCK AND ADAPTER SET DRILL BIT (SLENDER SHAFT) D3. 4X90 DRILL BIT (SLENDER SHAFT) D3. 5X90 ADAPTER FOR SLENDER SHAFT (SDS PLUS) TAPER SHANK DRILL BIT D11X100 TAPER SHANK DRILL BIT D12. 3X110 TAPER SHANK DRILL BIT D12. 7X110 TAPER SHANK DRILL BIT D14. 3X110 TAPER SHANK DRILL BIT D14. 5X110 TAPER SHANK DRILL BIT D17. 5X120 TAPER SHANK DRILL BIT D21. 5X140 SYRINGE (BLOW-OUT BULB TYPE) -- 6 --- * ALTERNATIVE PARTS Printed in Japan 4 -- 04 (040405N) [. . . ]