User manual HITACHI POWER TOOLS NV50AP2 ELECTRIC TOOL PARTS LIST

[. . . ] Inside the pack containing this manual, you will also find the guarantee and all the details necessary for installation. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Connecting the electricity and water supplies Connecting the water inlet hose !Before connecting the inlet hose to the water supply, run the water until it is perfectly clear. [. . . ] Press the DELAY TIMER button just once to display the delay time set previously. After the countdown has begun, the display will show the text “Starts in:” and the delay period. Once the set delay time has elapsed, the machine will begin its cycle and the display will show “Ends in:” and the time remaining until the end of the cycle. To remove the delayed start option, press the button until the display shows the text symbol will disappear. oFF; the 8 Modify the cycle settings. € Press the button to activate the option; the name of the option will then appear on the display and the corresponding indicator light will illuminate. € Press the button again to deactivate the option; the name of the option will then appear on the display followed by the text OFF, and the corresponding indicator light will switch off. If the selected option is not compatible with the selected wash cycle, this incompatibility will be signalled by the flashing of the indicator light and a sound alert (3 beeps); the option will not be activated. If the selected option is not compatible with another option that has been selected previously, the indicator light corresponding to the first option selected will flash and only the second option will be activated; the indicator light corresponding to the button will remain lit in a constant manner. The options may affect the recommended load value and/or the duration of the cycle. The corresponding indicator light remains lit in a fixed manner and the porthole door locks (the DOOR LOCKED indicator light illuminates). If you desire bleaching, use the compartment 3. When dosing the bleach, be careful not to exceed the “max” level (see figure). To bleach laundry without carrying out a full wash cycle, pour the bleach into the compartment 3, select the “Rinse” cycle and activate the “Super Wash” option . It cannot be used in conjunction with , , , , , , , . Super Wash To end the cycle press the START/PAUSE button or the “Easy Iron” button. For the Silk wash cycle, the machine will end the cycle while the laundry is soaking and the “Easy Iron” indicator light will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the “Easy Iron” button. It cannot be used in conjunction with , , , , . If you select this option, the wash cycle duration will be reduced by 30%-50%, depending on the selected cycle, thereby guaranteeing simultaneous water and energy saving. Use this cycle for lightly soiled garments. It cannot be used in conjunction with , , , , , , , , . [. . . ] € Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again. If the problem persists, contact the Technical Assistance Service. € The detergent is not suitable for machine washing (it should display the text “for washing machines” or “hand and machine wash”, or the like). The icons corresponding to the “Phase in progress” flash rapidly at the same time as the ON/OFF indicator light. [. . . ]