User manual HITACHI 17LD4200

[. . . ] LCD Colour Television Model 17LD4200 USER'S MANUAL MANUEL UTILISATEUR BEDIENUNGSANLEITUNG MANUAL DE USUARIO MANUALE D'USO BRUKSANVISNING READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER'S MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your monitor. SERIAL NO. The serial number is located on the rear of the monitor. This monitor is ENERGY STAR® compliant when used with a computer equipped with VESA DPMS. The ENERGY STAR® emblem does not represent EPA endorsement of any product or service. [. . . ] (Alternatively the button can be used. ) 4. The red button permits you to return to the previous selection. (Alternatively the button can be used. ) Direct page selection In the SIMPLE teletext mode, you can select a page by using the NUMBER buttons in TOP mode to enter the three-digit numbe. r. FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. 9 ENGLISH ENGLISH Page selection 1. Press the "INDEX " button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three-digit page number with the NUMBER buttons in FASTEXT mode. The / button can be used to select the previous or next page. REVEAL Press this button to display hidden information, such as solution of riddles or puzzles. Press this button again to remove the information from the display. 3. 2 Advanced Setting 3. 2. 1 TV settings The OSD shown below displays when you press "MENU" (on main body) or "" (on remote control) button. You can see four options shown as below. PICTURE: Bright, Contrast, Colour and Sharpness . SETUP: Language, Sleep, Channel search, Channel memory, Fine Tune, Channel Swap and Recall. SYSTEM: PAL / SECAM / SECAM L, Sound, NICAM. LANGUAGE When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. Press ", " (on remote control) button to select English, German, French, Spanish, or Italian as your preferred OSD language. AUDIO TREBLE 1. Press "MENU" (on main body) or "" (on remote control) button. Press " " (on main body) or ", " (on remote control) button to select TREBLE. Press " " (on main body) or ", " (on remote control) button to lower or raise the treble. BASS 1. Press "MENU" (on main body) or "" (on remote control) button. 2. Press " " (on main body) or ", " (on remote control) button to select BASS. 3. Press " " (on main body) or ", " (on remote control) button to lower or raise the bass. 10 BALANCE 1. Press "MENU" (on main body) or "" (on remote control) button. 2. Press " " (on main body) or ", " (on remote control) button to select BALANCE. 3. Adjust the speaker balance on Left/Right by pressing " " (on main body) or ", " (on remote control) button. PICTURE BRIGHT 1. [. . . ] Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is running on the correct timing. Refer to Chapter 3 for information on timing. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment Control button several times. [. . . ]