User manual HITACHI 17LD4220U

[. . . ] Gebruiksaanwijzing Instructions for use NL GB DK D 17LD4220U Instruktionsbog Bedienungsanleitung Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 2 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation Of The TFT TV To The Wall 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press button to decrease brightness. 3LFWXUH 3LFWXUH Setting Picture Mode: Setting Contrast Using or button select Contrast. Press button to increase contrast level. Press button to decrease contrast level. Using or button select Picture Mode. Press or button to set Picture Mode. Picture Mode can be set to Auto, 4:3, 16:9, Cinema, Subtitle, Zoom or Panorama. 3LFWXUH 3LFWXUH Setting Noise Reduction Setting Colour Using or button select Colour. Press button to increase colour level. Press button to decrease colour level. Using or button select Noise Reduction. Press or button to select Noise Reduction level Off or Minimum or Medium or Maximum then select store and press or button to save your setting. Note 1: At low signal level, changes on the Noise Reduction function are not effective when there is a menu on the screen. If the menu is removed, the effect of this function will be seen. With normal broadcasting, Noise Reduction changes are effective at once. 3LFWXUH Note 2: At moving pictures, while Noise Reduction is at maximum level, some picture distortion may occur. If Noise Reduction is set to medium or minimum, the picture will improve. Setting Sharpness Using or button select Sharpness. button to increase sharpness button to decrease sharpness - 15 - 3LFWXUH Feature Menu To enter the Feature menu directly, press the Yellow button, or Press "M" button, now you are in main menu. In the main menu, select Feature using or button. Then enter the Feature menu pressing / or OK button. 0HGLXP Setting Hue (During Playback NTSC system, this will appear in AV mode only when NTSC video source is applied. Otherwise, HUE option is invisible in Picture menu. ): Using or button select Hue. Center value is indicated with one arrow. 0HQX Sleep Timer As you enter the Feature menu, Sleep Timer will be the first selected option. Use or button to change the Sleep Timer values between Off, 0:15, 0:30, 0:45, 1:00, 1:15, 1:30, 1:45 and 2:00. If sleep timer is activated it is displayed with the TV status on the upper right of the screen. 3LFWXUH )HDWXUH To Store the Settings When the cursor is on any item which has no sub-menu press OK button on the remote control to store the settings directly. or, Press , or OK button on Store option to store Picture menu settings. 2II Once the time set with the sleep timer has elapsed, the set will go to standby. Child Lock You can use this feature to prevent children turning on/off TV or changing programmes or adjustments etc. [. . . ] If you are in doubt, consult your dealer. No Image means that your TV is not receiving any transmission. Have you pressed the No solution: Switch your TV set off and on. If this does not work, switch off, remove the mains plug and call the service personnel; never attempt to repair it yourself. - 31 - Specifications TV BROADCASTING PAL I/I RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) Input Signal Video: Sync: Analog 0. 7 Vp-p 75 ohm positive TTL Level positive or negative, Separate sync. [. . . ]