User manual HITACHI 20LD2500

[. . . ] Instructions for use GB 20LD2500 Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 2 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation Of The TFT TV To The Wall 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Before Switching On Your TV . . . . . . . . . . . . . . . . . 9 Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In this way any channel not suitable for younger viewers can be protected. This function enables or disables the menu protection system and allows the PIN code to be changed. Use or button to go to Parental Settings option. Press the "SELECT" button to enter Parental Settings Menu. A box asking for the lock key is displayed. Enter Lock Key There is only one key which is set to "0000" initially. If wrong Lock key is - 19 - Common Interface Up to five separate timer events can be set and each is displayed in the Timer screen, showing the event number, the channel to be selected, the start time, end time, date and the mode - whether that event is active (and will be acted on) or not. TIMER MENU No Channel Name 1. ITV 1 BBC ONE BBC ONE BBC ONE BBC ONE BBC ONE Start 20:00 00:00 00:00 00:00 00:00 00:00 End 21:00 00:00 00:00 00:00 00:00 00:00 Date 12/05/2005 01/01/2005 01/01/2005 01/01/2005 01/01/2005 01/01/2005 Mode Active Inactive Inactive Inactive Inactive Inactive Selected digital channel will be output via Scart-1 when in DTV source or if AV1 Output has been selected as DTV. In Analogue TV mode, scart output cannot be selected as DTV, if you switch the Analogue TV, a warning is displayed. WARNING DTV Timer is active Your action will cancel timer <M> to cancel <OK> to accept Toggle Mode MENU Exit SELECT Edit Timer i More If you accept and select OK, DTV timer is canceled, TV switches Analogue TV mode, scart-1 output becomes Analogue TV. You should connect your VCR to Scart-1 for recording digital broadcast. · To set an event, highlight its mode button using the or button and press the "SELECT" button to display the timer entry window. Name: Start: End: Date: Mode: 3. ITV 1 00:00 00:00 03/06/2005 Once Language Some programmes are broadcast in two or more languages simultaneously. The language heard can be selected from the Language Menu. · Press the "M" button to display the Main Menu and use or button to highlight the Language line and press the "SELECT" button. Main Menu Channel List Installation Configuration Timers Language TV Setup Common Interface · Here the five settings of channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using the or buttons. · The channel name is set using the or button to display the channel which broadcasts the programme. · The start time, end time and date are each set with the digit buttons on the remote control in 24-hour format. · The frequency mode determines how often the receiver operates this event and is set with the or button to be either Once , Daily, or Weekly. If an invalid number for the start or end times or the date is entered, "Entered time is not valid" message appears on the menu. If timer action occurs while the DigitalTV is watched, the TV switches to the selected channel. When timer expires, the TV switches to the channel which it is switched from. · Use the or button to highlight the soundtrack language required and press the "SELECT" button. Normal viewing, with the required language soundtrack, can be resumed by pressing the "M" button. Languages English - 20 - TV Setup To be able to go through TV functions, you can use this item. The digital TV Setup menu screen is accessed from the main menu. Press the "M" button to display the main menu and use or button to highlight "TV Setup", press the "SELECT" button to display TV Setup menu screen. Main Menu Channel List Installation Configuration Timers Language TV Setup Common Interface to a pay channel company, then insert those to the Television using the following procedure. [. . . ] See audio menu. - 34 - PC Input Typical Display Modes The display has a maximum resolution of 800x600, vertical sync. frequency range of 50-72 Hz and a horizontal sync. The following table is an illustration of some of the typical video display modes. Mode 1 2 3 4 5 Resolution Horizontal Vertical 640 400 640 480 640 480 800 600 800 600 Frequency Hor. (Hz) 31. 5 70 31. 5 60 37. 9 72 35. 2 56 37. 9 60 The native resolution of the TFT-LCD Panel is 800 x 600 pixels. [. . . ]