User manual HITACHI 22LE6560U

[. . . ] Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Press " " button after setting Teletext Language option. Scan Encrypted will be then highlighted. You can set Scan Encrypted as Yes if you want to scan coded stations. Afterwards select the desired Teletext Language. · Press OK button on the remote control to continue and the following message will be displayed on the screen: Select Automatic Channel Scan by using " "/" " button and press OK button. Automatic Channel Scan options will be displayed. You can select Digital, Analogue or Digital tuning using " "/" " and OK buttons. Press MENU button on the remote control and select Installation by using " " or " " button. Press OK button and the following menu screen will be displayed. English - 14 - Auto Channel Scan Menu Operation Digital: Searches and stores DVB stations. Analogue: Searches and stores analogue stations. Full: Searches and stores both analogue and DVB stations. · Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using . " " or " " and OK button. · After auto channel scan type is set and selected and confirmed, installation process will start and progress bar will move along. In such a case, located channels are not stored. Analogue Manual Search After selecting search type as analogue, you can use " "/" " button to highlight an item and then press " " or " " button to set an option. Enter the channel number or frequency using the numeric buttons. When the channel is located, any new channels that are not on the list will be stored. Manual Tuning HINT: This feature can be used for direct broadcast entry. · Select Manual Channel Scan from the Installation menu by using " "/" " and OK buttons. Manual Scan options screen will be displayed. · Select the desired Search Type using " " or " " button. Manual search options will change accordingly. Use " "/" " button to highlight an item and then press " " or " " button to set an option. You can press MENU button to cancel. Analogue Fine Tune · Select Analogue Fine Tune from the Installation menu by using " " or " " and OK buttons. [. . . ] · If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download progress. When download completes with success a message is displayed for reboot to activate new software. Press OK to continue with the reboot operation. 2) 3. AM search and upgrade mode · If Automatic scanning in Upgrade Options menu is enabled, TV wakes up at 03:00 and searches broadcast channels for new software upgrade. [. . . ]