User manual HITACHI 32LD8A10

[. . . ] Instructions for use GB D F I 32LD8A10 32LD8A10A Bedienungsanleitung Notice d'utilisation Istruzioni per l'uso Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 2 LCD TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] There is a subwoofer output that can accept an active subwoofer if you wish to create very high levels of Bass. 3DS This feature is used to create the impression that sound is coming from around the room instead of from the set speakers. Pressing the _ / ` buttons will turn the feature on or off. SubWoofer It is possible to connect an external, active subwoofer to the set to give a much deeper bass effect. By pressing a / b button, select Subwoofer. Set Subwoofer to On when you connect an external subwoofer to the set. Feature menu By pressing _ / ` button, select the third icon. Feature menu appears on the screen. Sleep Timer By pressing a / b button, select Sleep Timer. The timer can be programmed between Off and 2 hours in steps of 10 minutes by pressing _ / ` button. If sleep timer is activated, at the end of the selected time, the TV goes automatically to stand-by mode. Child Lock You can use this feature to prevent children turning the TV on or changing programs or adjustments etc. The child lock feature can be set by _ / ` button to either on or off. When off is selected, there will be no difference in the operation of your TV. When on is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons, except the Power on/off button, at the rear side of the TV will not work. If one of these buttons is pressed, Child Lock On will be displayed on the screen. - 12 - Language By pressing a / b button, select Language. By pressing _ / ` button, you can select the language. Ext-2 Out By pressing a / b button, select Ext-2 Out. You can set Ext-2 Out to TV, EXT-1, EXT-3, EXT-4, EXT-5 or PC by pressing _ / ` button. Note: Only audio input is available for EXT-3, EXT-5 and PC. The other options have both audio and video outputs. Default Zoom By pressing a / b button, select Default Zoom. You can set Default Zoom to Panoramic, 4:3 or 14:9 Zoom by pressing _ / ` button. If there is no WSS or aspect ratio (picture size) information and zoom mode is selected as Auto by pressing the button, then the zoom mode will automatically change to Default Zoom setting. [. . . ] If you would like to change the programme number or order, please refer to the Program Menu section of the instruction book. Installation Of The TFT TV To The Wall GB 1- To install the TFT TV on the wall, first of all, foot assembly should be removed. Unscrew the 6 screws (M4 x 12) that attach the foot assembly to the TFT panel and remove the foot assembly from the TFT panel. 2- Decide the place on the wall where the TFT panel would be placed. Fix the wall mounting stencil on the wall. [. . . ]