User manual HITACHI 42PMA225EZ

[. . . ] Instructions for use Istruzioni per l'uso GB I F E D 42PMA225EZ Notice d'utilisation Manual de Instrucciones Bedienungsanleitung Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 2 PLASMA MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PLASMA MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation Of Plasma Panel To The Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Sharpness level can be adjusted between 0 and 8. colour By pressing / button, select colour. right/left to adjust colour is seen on the screen. Colour level can be adjusted between 0 and 100. tint This item is displayed in picture menu if there is a NTSC signal. "right/left to adjust tint" is seen on the screen. Tint level can be adjusted between 0 and 100. When PC is Connected To Monitor via VGA or DVI socket: vpr ivtur % ph "% uhr $ vhy qsvprrvtsprvq brightness By pressing / button, select brightness. "right/left to adjust brightness" is seen on the screen. Brightness level can be adjusted between 0 and 100. contrast By pressing / button, select contrast. "right/left to adjust contrast" is seen on the screen. Contrast level can be adjusted between 0 and 100. phase This item is not available in the picture menu when PC is connected to monitor via DVI. "right/left to adjust phase" is seen on the screen. Phase level can be adjusted between 0 and 100. vpr ivtur % ph "% # uhr py #" v $ window menu By pressing / button, select the second icon. Window menu appears on the screen. qsvprrvtsprvq When the monitor modes are switched between AV modes; picture menu items (brightness, contrast, sharpness and colour) may require re-adjustment. - 10 - screen to down. v position can be adjusted between 0 and 100. vq When PC Connected To Monitor via DVI: svyyhyy vhtrvr vq vhtrvr qsvrrvt svyyhyy image size By pressing / button, select image size. "right/left to change image size" is seen on the screen. By pressing / button, you can change image size to fill all, zoom, letterbox, subtitle, normal, 14:9 and auto. When PC is Connected To Monitor via VGA socket: qsvrrvt image size By pressing / button, select image size. "right/left to change image size" is seen on the screen. By pressing / button, you can change image size to fill all, fill 1:1 and fill aspect. audio menu vq vhtrvr svyyhyy By pressing / button, select the third icon. [. . . ] Do not use abrasive solvents as they may damage the monitor screen coating layer. Specifications SOURCE INDICATOR On Screen Display OPERATING VOLTAGE 230-240V AC, 50 Hz. AUDIO German+Nicam Stereo AUDIO OUTPUT POWER (WRMS. ) (%10 THD) 2 x 10 POWER CONSUMPTION (W) (max. ) 310 W (Maximum condition) < 10 W (Stand-by) PANEL 16:9 display, 42 Screen Size DIMENSIONS (mm) Poor Picture Is your monitor located too close to nonearthed audio equipment or neon lights, etc. ?The picture quality may degrade when two peripherals are connected to the monitor at the same time. In such a case, disconnect one of the peripherals. No Picture Have you pressed the correct buttons on the remote control? [. . . ]