User manual HITACHI AX-M910

[. . . ] IMPORTANT The mains lead on this equipment may be supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug. [. . . ] By setting the sleep timer, you can fall asleep and know that your system will turn off by itself rather than playing all night. Playing picture CD disc Press the K button on the unit to open the disc tray and place the picture CD on the disc tray (with the printed side up). Press this button again to close the disc tray, the unit will read the disc and play it automatically. When menu list display or the picture displaying on the screen, you can press the 0-9 buttons to select the desired picture and press the ENTER button to confirm in the disc to start playing. Note: The playback will temporarily stopped when the selected pictures have been played. During picture playback, press the G button to go to the next picture, and press the H button to go to the previous picture. Press the button to invert the picture, press the rotate picture in anti-clockwise direction, press the button to mirror the picture, press the button to button to rotate picture in clockwise direction. Press PROGRAM button to select one of the transition effect for picture playback. (Example: Wipe Top, Diagonal Wipe Left Top, Window H etc. ) Press the ZOOM button repeatedly to display to picture with different scales. Use the buttons to view the zoomed picture. Use the L button to enter the "Thumbnail Mode". (Use the H or G buttons to display previous or next 12 pictures of disc. Press the MENU button to exit the "Thumbnail Mode" and return to menu list. Press the BF button to resume to normal playing. ) CD Operation Press the K button on the unit to open the disc tray then place the CD on the disc tray (with the printed side up). Press this button again to close the disc tray, the unit will read the disc and "CD" will be displayed on the VFD. In stop mode, press the BF button to start playing the disc, the track number and single elapsed time will be displayed on the VFD. When playing disc, press the BF button to temporarily stop the playing, single elapsed time will flash on the VFD. Press the button again, it will continue to play. (You can also press the key "BF" on the panel of unit. ) - 15 - Press the L button to stop playing, the track number and single elapsed time will be displayed on the VFD, then press the BF button, the unit will resume to play at the point it stop. Press the L button twice to stop the disc playing, the total track number and total play time will be displayed on the VFD. (You can also press the key "L" on the panel of unit. ) Load a CD, you can select tracks with the 0-9, 10+ buttons. * If the track number is 1-9, you may press 0 button before entering the desired track number or just enter the desired track number. (For example: The track number is 8, press 0 and then 8; or press 8 directly. ) * If the track number is over 9, press 10+ and then press the one of the 0-9 buttons or enter the desired track number by pressing 0-9 buttons directly. (For example: The track or chapter number is 28, press 10+ button twice and press the number button 8 or press 2 and then 8 directly, the track number and single elapsed time will display on the VFD. ) * When there are more than one folder in the CD/MP3/WMA, use the buttons to move the cursor to select the folder that display on the TV screen, then press the ENTER button to select the folder. [. . . ] Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]