User manual HITACHI AXM7E

[. . . ] DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat. ************** DON'T remove any fixed cover as this may expose dangerous voltages. [. . . ] Selecting a station Once you have tuned your unit, you can select the digital radio station you want to listen by pressing "SCROLL" 7, turn "MULTI FUNCTION" knob 8 and "SELECT" 17 to confirm. If you have assigned stations to presets you can also select them directly by pressing the relevant numbered button 3 or 57, see Storing and recalling presets. The top line of the display shows the name of the currently selected station. Press "SCROLL" 7 and rotate "MULTI FUNCTION" knob 8 to see the names of other stored stations on the buttom line of the display. Stop when you find the station to which you want to listen. Press "SELECT" knob 17 or 41 to listen to the station you have selected. The display may show "Now tuning. . . " briefly as it finds the new station. 2. If a station has one or more secondary services available the display will show ">>" next to the station name on the station list and they will appear after the primary service as you press "SCROLL" knob 17, turn "MULTI FUNCTION" knob 8 and "SCROLL" knob 17 to confirm. A secondary service will display "<<" before the station name on the station list indicating that it belongs to the primary service before it in the list. If the station has "?" before its name the service is currently inactive or invalid. If you select a station which has this symbol, the unit tries to tune to that station. If still unavailable "Station not available". Check your aerial is fully extended. 16 AMPLIFIER AND TUNER Changing the display mode The unit has six display modes which enable you to view parts of the broadcast data on the bottom line of the display. Press "SELECT" button 17 or 41 again to confirm. Note The list includes all channels, UK stations are in the range 11B to 12D. The empty block indiactes the minimum required level for reception and the solid blocks indicate the current level. Move your aerial or radio whilst watching the display and to try to raise the current level to the empty block or beyond. The display will change to show the multiplex name on the bottom line of the display once a good signal is received and the multiplex will be added to the service list. Press "MENU" button 5 or 43 to exit manual tuning or turn the "MULTI FUNCTION" knob 8 to select another channel. 18 AMPLIFIER AND TUNER Advanced setup options The unit has a number of advanced features which enable you to change the order and number of stations on the station list, perform manual tuning, apply Dynamic Range Control (DRC) and view the software version. Press the "MENU" 5 or 43 to enter the advanced setup menu, turn the "MULTI FUNCTION" knob 8 to scroll through the following menu options then press "SELECT" button 17 or 41 to select that option. Station Order This option enables you to choose the order in which stations appear as you scroll through the station list. When you select this option you see the currently selected order on the top row of the display and a scroll list on the bottom. Turn the "MULTI FUNCTION" knob 8 to scroll through the following options and press "SELECT" button 17 or 41 to select one: Alphanumeric Displays all stations in alphanumeric order. Display active stations at the top of the service list in alphanumeric order and inactive ones at the bottom in alphanumeric order. [. . . ] Press "SELECT/ALARM ON OFF"" key 17 or 41 will activate set clock mode, and the hour digit will blink, turn the "MULTI FUNCTION" knob 8 to set the hour. Press "SELECT/ALARM ON OFF" key 17 or 41 again, the minute digit will blink, turn the "MULTI FUNCTION" knob 8 again to set the minute. Press "SELECT/ALARM ON OFF" 17 or 41 again to confirm. If RDS is available, the unit will adjust the clock automatically when at tuner mode and RDS signal is detected. [. . . ]