User manual HITACHI C2166TN

[. . . ] 5 Via Ant Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting a decoder with an aerial socket to the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting a decoder without an aerial socket to the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Servicing Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock. 9. X-rays The x-rays generated in this television are shielded sufficiently. 30kV. Warning! Any intervention contrary to regulations, in particular, any modification of high voltage or a replacement of the picture tube may lead to an increased concentration of x-rays. Any television modified in this way no longer complies with license and must not be operated. Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled. Sockets for external connections are on the back of the TV. For connection of other devices via SCART connector (or RCA Jack) refer to the manuals of the related devices. To switch the TV off Press the stand-by button on the remote control, so the TV will switch to stand-by mode and the GREEN LED will become RED, or, Press the power button located on the front of the TV. Inserting batteries in the remote control handset Remove the battery cover located on the back of the handset by gently pulling upwards from the indicated part. Insert two MN2400 AAA or equivalent type batteries inside. Replace the battery cover. Operating the TV You can operate your TV both using the remote control handset and onset buttons. APS (Automatic Programming System) When you turn on your TV for the first time, Auto Setup menu will be displayed. Auto programming system automatically programmes your TV according to the transmission of programme systems in your area. In this menu if the language setting is incorrect, use or buttons to highlight Language and select the or buttons. On the remote control each option is identified with a different colour. To select an option, press the button with the corresponding colour, on the remote control handset. For example for sound settings, press RED button, for picture settings, press GREEN button etc. Sound Menu To change sound settings Enter the Sound Menu directly, pressing the Red button or, Press MENU button, now you are in main menu. In the main menu, select SOUND using or button, then enter the sound menu pressing or button. Setting Volume: As you enter the sound menu, Volume will be the first selected option. Or you can directly change the volume settings using (to increase) or (to decrease) button. Information Menu When you press the information button menu an explanation is given of how to: Select and go to a submenu Select and change items go to the previous menu exit that menu is given. in any To Store the Settings: Using or button select Store. Press button to store current sound settings. The or stored values will be valid for all the programmes. If the button is pressed when none of the menus activated, the TV status including Program number, name and Sound Mode will be displayed. In all the menus, pressing or button one of the or button items can be selected, pressing item can be changed or you can go to submenu, pressing the MENU button you can go to the previous menu and by pressing the TV button you will exit the menu. GB - 11 - Picture Menu To change picture settings: Enter the Picture Menu directly, pressing the GREEN button or, Press MENU button, now you are in main menu. In the main menu, select PICTURE using or button, then enter the picture menu pressing or button. [. . . ] The screen will switch to TV mode. To Display the Time While watching a TV programme with Teletext transmission press button. The current time information, captured from Teletext will be displayed at the upper right corner of the screen. If the programme being watched does not have Teletext transmission, only a blue box will be displayed at the same location. The time information will disappear after pressing button again. [. . . ]