User manual HITACHI C2844S

[. . . ] Instructions for use GB C2844S Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connect Peripheral Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connect Peripheral Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Main menu will be displayed at the middle on the screen. All the selected items in this menu system is indicated with CYAN characters and with an arrow on the leftside of items. @AA@8U @RV 6GDa@S TUPS@ Setting Balance It allows adjusting the distribution between the left and right speakers. Using or button select Balance. Press Press button to change balance rightward. button to change balance leftward. When balance control is in mid position, the cursor is displayed with the two reciprocal arrows. WPGV H@ 76G6 I8@ HP 9@ 6WG @AA@8U @RV 6GDa@S TUPS@ HP IP PI PAA To select a sub-menu use or button, and press or button. Each option can also be selected with the coloured button and " " button on the remote control. Selecting Mode Using or button select Mode. Press or button to change Mode. MAIN MENU The menu system is described below. ENGLISH - 8 - You can choose MONO, STEREO or DUAL (I-II) mode, only if the selected channel supports that mode. You can also change sound mode directly pressing III button on your remote control. In MODE item there are five predefined and one user defined options. These are USER, CLASSIC, JAZZ, ROCK, POP and FLAT. The predefined options can not be changed by the user. If you change one of the frequency values of the predefined options, the MODE is switched automatically to USER option. The USER option may be adjusted by the user. The 5 items below the MODE are available to adjust the sound settings in 5 frequency values: 120 Hz, 500 Hz, 1. 5 kHz, 5 kHz and 10 kHz. To change the values of 5 frequency options, select one of the options by or button, and then press to increase the value, or to decrease the value. In mid position, cursor is displayed with the two reciprocal arrows. To store the Equalizer settings, press or button on STORE option. During the store process all the items are stored, moreover, the USER mode information would not be lost. In other words, when the user mode is selected again, after storing the MODE with one of the predefined options, the user definde frequency values would be set. To Store the Settings Press or button on STORE option to store Sound menu settings. WPGV H@ 76G6 I8@ HP 9@ 6WG @AA@8U @RV 6GDa@S TUPS@ HP IP PI PAA In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option. Setting AVL Automatic Volume Limiting (AVL) function normalises sound to obtain fixed output level between programs, having different sound levels. Pressing or button will turn on and off this feature. WPGV H@ 76G6 I8@ HP 9@ 6WG @AA@8U @RV 6GDa@S TUPS@ HP IP PI PAA Setting Effect You can use this feature to switch the sound effect on and off. Pressing or button will turn on and off this feature. If the current sound system is MONO and the sound effect is set ON, then the sound will be heard as if it is STEREO. If the current sound system is STEREO, switching this effect on will make the sound deeper. [. . . ] Are the plugs connected tightly to the aerial socket?Are suitable plugs used to connect the aerial?If you are in doubt, consult your dealer. No Picture means that your TV is not receiving any transmission. [. . . ]