User manual HITACHI C32WF530N

[. . . ] Users Guide C28WF530N C32WF530N SCREEN Dear HITACHI customer Congratulations on your purchase of the very latest state of the art technology. At Hitachi we pride ourselves on producing high quality televisions with outstanding picture and audio capabilities, coupled with Hitachi's reputation for superior reliability. You should enjoy many years of trouble free operation from your TV. Take some time to read this Users Guide thoroughly, and if you encounter any difficulty, firstly refer to the Trouble Shooting Guide at the rear of this manual. [. . . ] VCR Recording from VCR Tuner The VCR is recording from its own tuner, using a frequency sent by the television, i. e. not one of the VCRs own preset channels. The television can be switched off and recording will not be affected. VCR Recording from VCR External The VCR is recording from one of its AV connections. The television can be switched off and recording will not be affected. VCR Has No Signal To Record There is no signal on the selected VCR input (VCR tuner or external AV connection). VCR Has Tape Problems There is a problem with the tape in the VCR (tape tangled, faulty, snapped etc. ). VCR Not Recording The VCR cannot record because of a problem other than listed. To Stop Recording - Press the VCR and Stop buttons on your handset simultaneously. To operate via the VCR - refer to VCR instruction manual. PLEASE NOTE: Generally, the VCR cannot record a TV channel that cannot be received properly by the VCR's tuner, even though you can view that channel on the TV. However, some VCR's can use the TV's output to record a TV channel. For details, refer to your VCR instruction manual. TV Auto Power On If you insert a tape and press `PLAY' on the VCR whilst the TV is in `Standby' mode, the TV will automatically switch ON and select AV1 so that you can view the tape. VCR Auto Power Standby If the TV is switched into `Standby' mode, the VCR will also switch into `Standby' mode, providing the VCR is not in operation. (If rewinding a tape, the VCR will not switch into `Standby' until rewinding has stopped. ) VCR Image View If the TV is in `Standby' mode, and a VCR menu is operated, the TV will automatically switch ON and the images from AV1 terminal will be displayed on screen. viewlink tuning in 19 tuning in . . . notes on Customer I. D. The Customer I. D. feature allows the user to enter a personal security code and address information into the television's memory, so that in the unfortunate event of theft, it will help the Police trace the owner. Please follow the steps below. 1 2 customer I. D. Press the MENU button. The MAIN MENU appears. Press the cursor DOWN button to select INSTALL. Once highlighted, accept selection. 3 Press the cursor DOWN button to select CUSTOMER I. D. Once highlighted, accept selection. 4 5 `ENTER PASSWORD' is highlighted. Press O. K. to accept selection. PLEASE NOTE: No other selection is available at this point. 6 7 8 9 Enter `1234' on handset - this password is preset at the factory. Press O. K. to accept selection. Press the cursor DOWN button to select NAME. Press the LEFT/RIGHT cursor keys to select each character and UP/DOWN cursor keys, or 0-9 number keys * to change each character (maximum of 16). 20 *The number buttons on your handset can also be used to enter letters. To enter letters: Press the number key twice for the first corresponding letter (written above the key), three times for the second etc. [. . . ] In the unlikely event that this product should develop a fault, we undertake to repair or replace any part of the product which fails due to a manufacturing defect within 12 months of the date of purchase provided that. . . the product has been installed and used only in accordance with the instructions supplied with the product. the product has not been repaired, maintained, or modified by any person other than a Hitachi authorized dealer. the product serial number has not been removed or altered. [. . . ]