User manual HITACHI CDS225W

[. . . ] Liquid Crystal Projector Thank you for purchasing this liquid crystal projector. WARNING · Please read the accompanying manual "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE · The information in this manual is subject to change without notice. [. . . ] · For the COMPONENT VIDEO input, this function is not effective and the signal type is distinguished automatically. HDTV Operation Start/Stop: Press the / button. Select HDTV Mode: Select the 1080i mode or 1035i mode suitable for the input signal with the / button. · When the selected HDTV mode is incompatible with the input signal, the image may be incorrect (eg. the display position or color is incorrect). ENGLISH-12 OPERATIONS (continued) SETUP INPUT IMAGE OPT. The following adjustments and settings are available when IMAGE is selected on the menu. Select an item with the and buttons, and start operation. BLANK MIRROR START UP GAMMA COLOR TEMP Table 6. Image Menu Item BLANK MIRROR Description Select Blank Screen Color: Select color with the and buttons. · The image is cleared when the BLANK mode is set with BLANK ON, or when there is no signal, and the entire screen is displayed in the selected color. START UP Operation Start/Stop: Press the / button. Select Mirror Status: Select mirror status with and buttons. Operation Start/Stop: Press the / button. Setup Initial Screen Display: Select TURN ON with the button. Clear Initial Screen Display: Select TURN OFF with the button. · Note that if TURN OFF is selected the blank screen is displayed in blue when there is no signal. GAMMA COLOR TEMP Operation Start/Stop: Press the / button. Select Gamma Mode : Select the gamma mode with the / button. Operation Start/Stop: Press the / button. Select Color Temperature: Select the color temperature mode with the / button. ENGLISH-13 ENGLISH Image Menu OPERATIONS (continued) Options Menu The following adjustments and settings are available when OPT. Select an item with the and buttons, and start operation. 16 VOLUME MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER Table 7. Options Menu Item VOLUME MENU COLOR LANGUAGE Description Volume Adjustment: Reduce VOLUME Increase VOLUME Select Menu Background Color: Select with the Operation Start/Stop: Press the or button. Select Menu Display Language: Select with the and and buttons. buttons. AUTO OFF Operation Start/Stop: Press the or button. Set AUTO OFF: Set 1~99 minutes with the and buttons. The system automatically enters the standby mode when a signal is not received for the set time. Clear AUTO OFF: Select STOP (0 min. ) with the button. When STOP is selected the system does not enter the standby mode even if no signal is received. Operation Start/Stop: Press the or button. SYNC ON G Valid: Select TURN ON with the button. [. . . ] Contact your dealer if the same problem occurs when the ambient temperature is green red red 0~35°C. Blinks Turns off /Lights red Blinks red NOTE *2) When the internal temperature becomes excessive power is switched OFF automatically for safety reasons, and the indicator is extinguished. Set the power switch to [O] and wait for 20 minutes until the equipment has cooled sufficiently. ENGLISH-20 TROUBLESHOOTING (continued) Before requesting repair, check in accordance with the following chart. If the situation cannot be corrected, then contact your dealer. Table 11. Symptom Symptom The power is not turned on. Possible cause The main power switch is not turned on. [. . . ]