User manual HITACHI CG2026S

[. . . ] Instructions for use GB CG2026S Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connect Peripheral Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connect Peripheral Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Volume Setting Press VOL+ button to increase volume. A volume level scale (slider) will be displayed at the middle of the bottom on the screen. To select a sub-menu use or button, and press or button. Each option can also be selected with the coloured button and " " button on the remote control. MAIN MENU The menu system is described below. Programme Selecting (Previous or next programme) Press button to select the previous programme. Press button to select the next programme. Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9. TV will switch to the selected programme. To select programmes between 10 - 99, you must use the double digit button "- -". The short way in order to enter the menus, press : " " Button, Main Menu. Red Button, Green Button, Picture Menu. Yellow Button, " Blue Button, Install Menu. Menu button has two functions; first is opening or closing the "MAIN MENU", and the second is closing the sub-menu and then opening its parent menu. Sound Menu To change sound settings Enter the Sound Menu directly, pressing the Red button or, As you enter the main menu, sound will be the first selected option. In the main menu, select SOUND using or button, then enter the sound menu pressing button. this OSD is displayed at the left hand upper on the screen. After this, press the digit buttons consecutively for the programme you want to select (eg. for programme 27, first press 2 and then 7). If the second digit is not entered within 3 seconds, this function will disappear. Setting Volume: As you enter the sound menu, Volume will be the first selected option. Press Press button to increase volume. or GB - 8 - Or you can directly change the volume settings using VOL+ (to increase) or -VOL (to decrease) button. Press Press button to increase contrast level. button to decrease contrast level. 92/80( $9/ 6725( 21 Setting AVL Automatic Volume Limiting (AVL) function normalises sound to obtain fixed output level between programs, having different sound levels. Pressing or button will turn on and off this feature. [. . . ] Is your TV set or house aerial located too close to the loudspeakers, nonearthed audio equipment or neon lights, etc. Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or Teletext unrecognisable? [. . . ]