User manual HITACHI CMP307XU

[. . . ] Color Plasma Display Monitor CMP307XE CMP307XU USER MANUAL MANUEL UTILISATEUR BEDIENUNGSANLEITUNG MANUAL DE USUARIO MANUALE D'USO with EasyMenu!EasyMenu is HITACHI's On Screen Display function for easy operation. READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your monitor. SERIAL NO. The serial number is located on the rear of the monitor. [. . . ] Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR § 2. 909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR § §1 5. 101 to 15. 109. Trade name: Plasma Display Monitor Model Number: MP2 INSTALLATION INSTRUCTIONS Installation ENGLISH 9 q No stand is provided with this product. When installing the monitor, use the optional Desk-top Stand (CMPAD03), Wall Mount Unit CMPAK04 or Ceiling Mount Unit (CMPAT04). The Desk-top Stand has been used for the illustrations in this manual. s Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that this company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation. s Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt this work yourself. Ask your dealer to provide the name of a qualified installer. s In order to prevent an internal temperature increase, maintain a space of 10cm or more between the sides and other objects such as walls, etc. , so that the ventilation holes are not blocked. * Desk-top Stand Wall-mount unit Ceiling mount unit Type : CMPAD03 External dimensions : 650 (W) x 251 (H)x 300 (D) (mm) Type : CMPAK04 Angle change type : 0 ~ 20° Adjustment five steps is possible. External dimensions : 675 (W) x 560 (H)x 77 (D) (mm) Type : CMPAT04 Angle change type : 0 ~ 25° Adjustment five steps is possible. External dimensions : 480 (W) x 959 (H)x 330 (D) (mm) Anti-tumble measures (for only desk-top stand, CMPAD03) s Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury. Securing to a wall or post x Using M4 screws (two), fasten the hooks included to the screw holes at both ends of the top of the rear of the set as shown. Screw Hook Cord or Chain 10cm or more* Clamp Using a commercially available cord, chain and clamp, secure the set to a firm wall or post. Cord or chain Securing desktop x Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown. Using commercially available wood screws, secure the set firmly in position. Wood screw Two places INSTALLATION INSTRUCTIONS (continued) Standard accessories q This product is complete with the display monitor, plus the accessories shown below. s If any of these accessories is missing, please contact your dealer. Color Plasma Display Monitor ENGLISH 10 CMP307EX with USER MANUAL MANUEL UTILISATEUR BEDIENUNGSANLEITUNG MANUAL DE USUARIO MANUALE D'USO EasyMenu! EasyMenu is HIT ACHI's On Screen Display function for easy operation. READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your monitor. SERIAL NO. The serial number is located on the rear of the monitor . This monitor is ENERGY STAR® compliant when used with a computer equipped with VESA DPMS. The ENERGY STAR® emblem does not represent EP A endorsement of any product or service. As an ENERGY STAR® Par tner, Hitachi, Ltd. has deter mined that this product meets the ENERGY STAR® guidelines for energy efficiency . Instruction manual (this book) Remote-control transmitter Size AA batteries x 2 Power cable Signal cable, mini-D-sub 15-pin s Read the instruction manual (this book) and the warranty card carefully and keep them in a safe place for handy reference. s Retain the packing materials for use in future shipping or relocation. Component Names Front Panel Cabinet (front frame) Stand Control panel s The Adjustment button is located on the bottom. STANDBY(RED) ON (GRN) RGB MENU SELECT [VOLUME] Indicating lamp 14 Subpower button 14 Remote-control sensor 13 VOLUME button SELECT button MENU button RGB button 14 16 15 14 Component Names (continued) ENGLISH 11 Rear Power cable connector 12 Main power switch 14 External device connection terminals RGB input terminals 12 Remote controller POWER button 14 POWER RECALL RGB/ VIDEO 14 RGB/VIDEO button(*) *: "VIDEO" is not available. RECALL button 15 MUTE button 15 MUTE VOLUME 14 VOLUME button MENU MENU button 16 SELECT 15 SELECT button INSTALLATION INSTRUCTIONS (continued) Installation and Cabling Connecting to the PC q Read Usage Notes ( 3 to 8 ) carefully to ensure maximum safety before proceeding to these steps: x Make sure that the display signals produced by your PC meet the specifications of this product. s For the specifications of this product, see Product Specifications ( 25 to 27 ). Choose an appropriate site and install the product on a level table where the stand is secure. [. . . ] Press the key of the SELECT button 2 times and select DISPLAY. Press the key 3 times and select CLOCK. Symptom 2 Text displayed across the screen appears blurred in its entirety (display 3). A fine pattern flickers when displayed on the screen (display 4). Display 3 ABCDEFGHIJ abcdefgABCDEFGabcd ABCDEFGHIJ abcdefgABCDEFGabcd Before adjustment Display 4 Before adjustment ABC ABC Example After adjustment After adjustment ABC x Press MENU button to open the adjustment menu. Press the key of the SELECT button 2 times and select DISPLAY. [. . . ]