User manual HITACHI CP-RX60Z

[. . . ] Projector User's Manual ­ Operating Guide CP-RX60 Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] Left Right Using the buttons / adjusts the horizontal phase to eliminate flicker. Right Left · This item can be chosen only at a RGB signal or a component video signal (except 525i (480i) and 625i (576i)). MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU :SELECT ASPECT 4:3 95 OVER SCAN 25 V POSITION 142 H POSITION 16 H PHASE 1344 H SIZE AUTO ADJUST EXECUTE ASPECT OVER SCAN V POSITION H POSITION H PHASE 30 Multifunctional settings IMAGE menu (continued) Item Description Using the buttons / adjusts the horizontal size. Large Small · This item can be chosen only at a RGB signal. · When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button during this operation. Choosing this item performs the automatic adjustment feature. At a RGB signal The vertical position, the horizontal position, the clock phase and horizontal size will be automatically adjusted. And the aspect ratio (ASPECT) will be automatically selected. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. At a video signal or s-video signal The signal type mode best suited for the respective input signal and the aspect ratio (ASPECT) will be selected automatically. And the vertical position (V POSITION), the horizontal position (H POSITION) will be automatically adjusted. At a component video signal The vertical position (V POSITION), the horizontal position (H POSITION) and the clock phase (H POSITION) will be automatically adjusted. And the aspect ratio (ASPECT) will be automatically selected. · This function is available only when the AUTO mode is selected to the item VIDEO FORMAT of INPUT menu. For a component video signal, the signal type is identified automatically independently of this function. · The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input. · This operation may not work well at some signals. a irregular picture, a color lack), please select the suitable mode to the item "VIDEO" of the INPUT menu. H SIZE AUTO ADJUST EXECUTE 31 Multifunctional settings INPUT menu With the INPUT menu, items shown in the table below can be performed. Choose an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item Description Using the buttons / switches the mode for color space. AUTO RGB SMPTE240 REC709 REC601 COLOR SPACE · This item can be chosen only at a RGB signal or a component video signal. [. . . ] (3) The projector returns the response code `06H' to the computer. Increasing the projector setting value (Increment command) (1) The computer sends the increment code Header + Command data (`04H'+ `00H'+ type (2 bytes) +`00H'+`00H') to the projector. (2) The projector in creases the setting value on the above setting code. (3) The projector returns the response code `06H' to the computer. [. . . ]