User manual HITACHI CP-X205WF

[. . . ] Projector CP-X205/CP-X305 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING WARNING CAUTION NOTE Trademark acknowledgment 1 Read this Safety Guide first. Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING · Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product could possibly result in personal injury or physical damage. [. . . ] The signal cables are not correctly connected. 35 10 62 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page The computer cannot detect the projector as a plug and play monitor. 11 The BLANK screen is displayed. The FREEZE function is working. 21 21 Color settings are not correctly adjusted. 31 COLOR SPACE setting is not suitable. 31 The brightness and/or contrast are adjusted to an The WHISPER function is working. The lamp is approaching the end of its product lifetime. Either the focus and/or horizontal phase settings are not properly adjusted. The lens is dirty or misty. 58 NOTE 63 Item <CP-X205> <CP-X305> 7W 320 W Computer input port Computer output port Video input port Audio input/output port Others Lamp : MU04951 64 117 129 270 BATTERY 340 65 Projector CP-X205/CP-X305 User's Manual (detailed) Network Guide This manual is only intended to explain Network Functions. For safety, operations or any other issues, refer to the Safety Guide or Operating Guide. WARNING · Before using this product, please read all manuals for this safe place for future reference. NOTE · The information in this manual is subject to change without notice. · The manufacturer assumes no responsibility for any errors that may appear in this manual. · The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. · Windows is a registered trademark of Microsoft Corporation. · Netscape is a registered trademark of Netscape Communications Corporation. · JavaScript is a registered trademark of Sun Microsystems, Inc. Contents Network Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 E-mail Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 1 Network Functions Network Functions This projector is equipped with the following network functions. You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. ( 4) E-mail Alerts the projector requires maintenance or has encountered an error. ( 23) This projector is SNMP (Simple Network Management Protocol) compliant, allowing you to monitor it from a remote location using SNMP software. In ( 25) You can schedule the projector to perform various functions according to the date and time. ( 26) The projector can display still images that are transferred via the network. ( 29) ( 31) 2 Network Functions suit your network. Consult with your network administrator before connecting the cause problems on your network. NETWORK menu ( "NETWORK menu" section of the User's Manual - Operating Guide). to the steps in the following section. "NETWORK menu" section of the User's Manual - Operating Guide). 1. IP ADDRESS : Enter an appropriate IP address for the projector to connect to your network. SUBNET MASK : Enter an appropriate subnet mask for the projector to connect to your network. [. . . ] (3) The projector returns the response code `06H' to the PC. Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (`05H' + `00H' + type (2 bytes) + `00H' + `00H') (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code `06H' to the PC. [. . . ]