User manual HITACHI CP-X4020GF

[. . . ] Projector CP-X4020 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. [. . . ] cursor buttons turns on/off the built-in speaker. ON OFF When the OFF is selected, the built-in speaker does not work. The combination of a picture and audio input port can be arranged in the menu. The audio coming into the port selected in the (2) is output while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using the / cursor buttons. COMPUTER IN1 COMPUTER IN2 COMPONENT (Y, Cb/Pb, Cr/Pr) AUDIO OUT STANDBY VIDEO S-VIDEO AUDIO SOURCE · Choose the AUDIO OUT STANDBY, to select the audio output to the AUDIO OUT ports in the standby state. The built-in speaker does not work in the standby state. · While the RETURN is selected, pressing the cursor (or the ENTER) button returns to the previous menu. (2) Select one of the AUDIO IN ports using the / cursor buttons. AUDIO IN1 AUDIO IN2 AUDIO IN3 · disables the audio output. (Closed Caption) is automatically activated when is selected and an input signal containing C. C. This function is available only when the signal is NTSC for the VIDEO or the S-VIDEO, or 480i@60 for the COMPONENT, the COMPUTER IN1 or the COMPUTER IN2, and when the AUTO is selected for the DISPLAY in the C. C. menu under the SCREEN menu ( 41). 36 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor (or the ENTER) button to execute the item. Then perform it according to the following table. Item Description Using the / / / cursor buttons switches the OSD (On Screen Display) language. ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL. . . (shown in the LANGUAGE dialog) LANGUAGE Press the ENTER (or the INPUT) button to save the language setting. MENU POSITION Using the / / / cursor buttons adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. Using the / cursor buttons switches the mode for the blank screen. The blank screen is a screen for the temporarily blanking feature ( 21). It is displayed by pressing the BLANK button on the remote control. MyScreen ORIGINAL BLUE WHITE BLACK BLANK MyScreen : Screen can be registered by the MyScreen item ( 38). ORIGINAL : Screen preset as the standard screen. BLUE, WHITE, BLACK : Plain screens in each color. [. . . ] RCA x1 Lamp: DT01051 Filter set: MU06641 Mounting accessary Laser and wired remote control: RC-R008 Computer input port 16W AC 100-120V/4. 6A, AC220-240V/2. 1A 390W Liquid crystal projector 786, 432 pixels (1024 horizontal x 768 vertical) Ports 16 Troubleshooting - Warranty and after-service If an abnormal operation (such as smoke, strange odor or excessive sound) the CD and run through the suggested checks. If this does not resolve the problem, please consult your dealer or service company. They will tell you what warranty condition is applied. for this projector. http://www. hitachi. us/digitalmedia or http://www. hitachidigitalmedia. com NOTE this manual. permitted without express written consent. [. . . ]