User manual HITACHI CP-X8160GF
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI CP-X8160GF. We hope that this HITACHI CP-X8160GF user guide will be useful to you.
Lastmanuals help download the user guide HITACHI CP-X8160GF.
Manual abstract: user guide HITACHI CP-X8160GF
Detailed instructions for use are in the User's Guide.
[. . . ] Projector
CP-X8150/CP-X8160/CP-WX8240/ CP-WX8255/CP-SX8350/CP-WU8440/ CP-WU8450
User's Manual (detailed) Operating Guide
Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] For details on ALTITUDE, refer to ALTITUDE of SERVICE in the OPTION menu ( 67). If the projector is used with a wrong setting, it may cause damage to the projector itself or the parts inside. Please immediately turn the power off, and clean or change the air lter referring to the section Cleaning . After cleaning or changing the air lter, please be sure to reset the lter timer. After the remedy, reset the power to ON.
Lighting In Green
Simultaneous blinking in Red
Lighting In Green
Alternative blinking in Red
There is a possibility that the interior portion has become overcooled.
Please use the unit within the usage temperature parameters (0°C to 40°C or 45°C ( User's Manual (concise))). Please refer to 3. 1. 7 Schedule Settings in the Network Guide.
Blinking In Green for approx. 3 seconds.
(continued on next page)
Regarding the indicator lamps (continued) NOTE · When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has sufciently cooled down, please make conrmation of the attachment state of the lamp and lamp cover, and then turn the power on again. For the SECURITY indicator, see SECURITY INDICATOR in the SECURITY menu ( 91). For the SHADE indicator, see the section "Temporarily shading the screen" ( 36). Utilize this feature to keep the interior of the projector in good condition.
FILTER indicator Turned off Lighting In Orange Lighting In Red No need to clean up. It is required to turn the power off and clean the air lter immediately. Description
NOTE · The FILTER indicator might light up in orange or red when something blocks the intake vents even though the air lter is clean. · The FILTER indicator might light up differently from other indicators or display messages related to cleaning the air lter. Follow the prompt that is displayed earlier.
Resetting all settings
When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE item in OPTION menu ( 73) can reset all settings (except settings such as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, STANDBY MODE, COMMUNICATION, SECURITY and NETWORK) to the factory default.
Phenomena that may be easy to be mistaken for machine defects
About the phenomenon confused with a machine defect, check and cope with it according to the following table.
Phenomenon Cases not involving a machine defect Reference page 16
The electrical power cord is not plugged in. The main power source has been interrupted during operation such as by a power outage (blackout), etc. Please disconnect the power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either Please turn the power off and disconnect the power plug from the power outlet, and allow the projector to cool down at least 45 minutes. After the projector has sufciently cooled down, please make conrmation of the attachment state of the lamp and lamp cover, and then turn the power on again. Neither sounds Correctly set up the signal source device by referring to nor pictures are the manual of the source device. The signal cables are not correctly connected.
Correctly connect the audio cables.
10 ~ 14
26 25 10 ~ 14 25, 55
The volume is adjusted to an extremely low level.
Sound does not come out. [. . . ] MERK · Informasjonen i denne håndboken kan endres uten varsel. · Produsenten påtar seg intet ansvar for eventuelle feil som fremkommer i denne håndboken. · Reproduksjon, overføring eller bruk av dette dokumentet eller deler av det, er ikke tillatt uten uttrykt skriftlig tillatelse. OPMERKING · De informatie in deze handleiding kan zonder voorafgaande kennisgeving veranderd worden. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI CP-X8160GF
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI CP-X8160GF will begin.