User manual HITACHI CP-S370
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI CP-S370. We hope that this HITACHI CP-S370 user guide will be useful to you.
Lastmanuals help download the user guide HITACHI CP-S370.
You may also download the following manuals related to this product:
HITACHI CP-S370 PRODUCT SPECIFICATIONS (161 ko)
HITACHI CP-S370 TECHNICAL SPECIFICATIONS (62 ko)
Manual abstract: user guide HITACHI CP-S370
Detailed instructions for use are in the User's Guide.
[. . . ] CP-S370W
Please read this user's manual thoroughly to ensure correct usage through understanding.
Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung aufmerksam.
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.
Vi preghiamo voler leggere attentamente il manuale d'sitruzioni in modo tale da poter comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.
MANUAL DE USUARIO
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de uitgebreide mogelijkheden.
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.
INSTRUÇÕES DO PROPRIETÁRIO
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do usuário.
TECHNICAL REGULATORY NOTICES
ITALIANO FRANÇAIS DEUTSCH
Liquid Crystal Projector
Liquid Crystal Projector
Thank you for purchasing this liquid crystal projector. WARNING · Please read the accompanying manual "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE · The information in this manual is subject to change without notice. [. . . ] SYNC ON G Invalid: Select TURN OFF with the button.
SYNC ON G
· May not be displayed correctly with some input signals when SYNC ON G is valid. In such cases, remove the signal connector so that no signal is received, set SYNC ON G to invalid, and reconnect the signal.
Set / Crear WHISPER Mode: Press the / button. In the WHISPER mode, acoustic noise level from the unit is reduced, and brightness level on screen is a little lower.
No Signal Menu
The same adjustments and settings are available as with the Image and Options menus when the MENU button is pressed during display of the "NO INPUT IS DETECTED ON ***" or "SYNC IS OUT OF RANGE ON ***" message while no signal is received. Select an item with the and buttons, and start or stop operation with the and buttons.
VOLUME BLANK MIRROR START UP MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER 16
Table 8. No Signal Menu Item
Increase · When this function is used, audio input is automatically switched to video. The audio input can be switched by moving the DISK PAD left and right during the display of the volume adjustment bar. The volume adjustment bar is displayed by pressing VOLUME / button.
Select Blank Screen Color: Select the color with the BLANK MIRROR
· When the blank mode is set with BLANK ON, by absence of a signal, or by input of a non-standard signal, the image is cleared and the complete screen is displayed in the selected color.
Select Mirror Status: Select the mirror status with the
Setup Initial Screen Display: Select the TURN ON with the Clear Initial Screen Display: Select the TURN OFF with the
· Note that if TURN OFF is selected the blank screen is displayed in blue when there is no signal.
MENU COLOR LANGUAGE
Select Menu Background Color: Select the color with the / button. The system automatically enters the standby mode when a signal is not received for the set time. When the STOP is selected the system does not enter the standby mode even if no signal is received. SYNC ON G Invalid: Select the TURN OFF with the button.
· May not be displayed correctly with some input signals when the SYNC ON G is valid. In such cases, remove the signal connector so that no signal is received, set the SYNC ON G to invalid, and reconnect the signal.
SYNC ON G
Set / Crear WHISPER Mode: Press the / button. In the WHISPER mode, acoustic moise level from the unit is reduced, and brightness level on screen is a little lower.
HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
Contact your dealer before replacing the lamp. For the optional lamp, see the item "Optional Parts" of the Table 12. Before replacing the lamp, switch power OFF, remove the power cord from the power outlet, and wait approximately 45 minutes until the lamp has cooled. WARNING · For disposal of used lamp, treat according to the instruction of community authorities. · Since the lamp is made of glass, do not apply shock to it and do not scratch it. · Premature lamp failure MAY be caused by an electronic component in the projector and not necessarily the lamp. · If it is probable that the lamp has exploded (explosive sound is heard), disconnect the power plug from the power outlet and ask your dealer to replace lamp. The lamp is covered by front glass, but in rare cases, the reflector and the inside of the projector may be damaged by scattered broken pieces of glass, and broken pieces could cause injury when being handled. · Do not use the projector with the lamp cover removed.
Projector lamps have a finite life. The image will become darker, and hues will become weaker, after a lamp has been used for a long period of time. Replace the lamp if the LAMP indicator is red, or the CHANGE THE LAMP message appears when the projector is switched ON. [. . . ] (3) The projector returns the response code `06H' to the computer.
Decreasing the projector setting value (Decrement command)
(1) The computer sends the decrement code Header + Command data (`05H'+`00H'+ type (2 bytes) +`00H' + `00H') to the projector. (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code `06H' to the computer.
When a command sent by the projector cannot be understood by the computer
When the command sent by the projector cannot be understood, the error command `15H' is returned by the computer. Some times, the projector ignores RS-232C commands during other works. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI CP-S370
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI CP-S370 will begin.