User manual HITACHI CP-X10000

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI CP-X10000. We hope that this HITACHI CP-X10000 user guide will be useful to you.

Lastmanuals help download the user guide HITACHI CP-X10000.


HITACHI CP-X10000 : Download the complete user guide (8945 Ko)

You may also download the following manuals related to this product:

   HITACHI CP-X10000 (7289 ko)
   HITACHI CP-X10000 DATASHEET (808 ko)
   HITACHI CP-X10000 NETWORK GUIDE (1153 ko)
   HITACHI CP-X10000 TECHNICAL GUIDE (589 ko)
   HITACHI CP-X10000 PRODUCT SPECIFICATIONS (808 ko)
   HITACHI CP-X10000 TECHNICAL SPECIFICATIONS (1153 ko)

Manual abstract: user guide HITACHI CP-X10000

Detailed instructions for use are in the User's Guide.

[. . . ] Projector CP-X10000/CP-WX11000/CP-SX12000 User's Manual (detailed) ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. WARNING This entry warns of a risk of serious personal injury or even death. [. . . ] When the slant of the projector is changed, execute this function again. · The adjustable range of this function will vary among inputs. · When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. · When the zoom adjustment is set to the TELE (telephoto focus), this function may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible. · When the projector is placed on the level (about ±3°), this function may not work. · When the vertical lens shift is not set fully upward (not set fully downward for the optional lens type USL-801 only (51), this function may not work well. · When the horizontal lens shift is not set to the center, this function may not work well. · This function will be unavailable when the Transition Detector is on (64). Shrink the bottom of the image ó Shrink the top of the image · The adjustable range of this function will vary among inputs. · When the horizontal lens shift is not set to the center, this function may not work well. · This function will be unavailable when the Transition Detector is on (64). AUTO KEYSTONE KEYSTONE (continued on next page) 40 SETUP menu Item Description Using the / buttons corrects the horizontal keystone distortion. Shrink the left of the image ó Shrink the right of the image · The adjustable range of this function will vary among inputs. · When the zoom adjustment is set to the TELE (telephoto focus), this function may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible. · When the vertical lens shift is not set fully upward (not set fully downward for the optional lens typeUSL-801 only (51), this function may not work well. · This function will be unavailable when the Transition Detector is on (64). NORMAL ó ECO · When the ECO is selected, acoustic noise and screen brightness are reduced. Using the / buttons switches the mode for mirror status. KEYSTONE ECO MODE NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT MIRROR If the Transition Detector is on and MIRROR status is changed, Transition Detector alarm (64) will be displayed when projector is restarted after the power switch is turned off. When V:INVERT or H&V:INVERT is selected, functions of / cursor buttons on the projector are reversed after the dialog menu disappears. The combination of a picture shown on screen and output from the MONITOR OUT port can be arranged in the menu. The picture coming into the port selected in the (2) is output to the MONITOR OUT port while an image from the port chosen in the (1) is on screen. [. . . ] The main power source has been interrupted during operation such as by a power outage (blackout), etc. Power does not come on. Please disconnect the power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. 19, 20 Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. Please turn the power off, and allow the projector to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. (Continued on next page) 67 74 Troubleshooting Phenomenon Cases not involving a machine defect Reference page 11 31 The signal cables are not correctly connected. Correctly connect the connection cables. The brightness is adjusted to an extremely low level. Adjust BRIGHTNESS to a higher level using the menu function or the remote control. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI CP-X10000

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI CP-X10000 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag