User manual HITACHI CPX1250

[. . . ] Portable LCD Projector CP-X1200 / CP-X1250 User's Manual - Safety Guide Please read this user's manual thoroughly to ensure correct usage understanding. User's Manual - Quick Guide Please read this user's manual thoroughly to ensure correct usage understanding. User's Manual - Operating Guide Please read this user's manual thoroughly to ensure correct usage understanding. User's Manual - Operating Guide, TECHNICAL Please read this user's manual thoroughly to ensure correct usage understanding. Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING · Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product could possibly result in personal injury or physical damage. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in these manuals of this projector. [. . . ] : ESPAÑOL ITALIANO DEUTSCH RESET Select the EXECUTE using the button to reset the MAIN menu items. : EXECUTE CANCEL The items of the MAIN menu are collectively returned to the initial setting. Note that the items "WHISPER" and "LANGUAGE" are not reset. 23 Multifunctional Settings (continued) PICTURE-1 Menu With the PICTURE-1 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item Description Select a gamma mode using the / buttons. : NORMAL CINEMA DYNAMIC CUSTOM Selecting the CUSTOM and then pressing the (or the ENTER) button calls the CUSTOM menu. CUSTOM Menu GAMMA Select an item using the / buttons, and press the NORMAL GAMMATEMP 2. 2 CINEMA HIGH COLOR DYNAMIC 100 R (or the ENTER) button to perform each function. CUSTOM 100 G 100 B GAMMA COLOR TEMP R G B memo The R, G and B can be selected only when the : SELECT USER is selected under the COLOR TEMP. GAMMA GAMMA COLOR TEMP R G B COLOR BAL R COLOR BAL G COLOR BAL B Adjust the gamma data using the Up Down / / buttons. : MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION NETWORK : SELECT GAMMA COLOR BAL R COLOR BAL G COLOR BAL B SHARPNESS COLOR TINT MY MEMORY NORMAL +0 +0 +0 +0 +0 +0 LOAD1 Select a color temperature using the HIGH MIDDLE LOW USER Adjust the red color level for the USER mode of the COLOR TEMP using the / buttons. : Strong Weak Adjust the green color level for the USER mode of the COLOR TEMP using the / buttons. : Strong Weak Adjust the blue color level for the USER mode of the COLOR TEMP using the / buttons. : Adjust the red color balance using the Strong Weak Adjust the green color balance using the Strong Weak Adjust the blue color balance using the Strong Weak SHARPNESS Adjust the sharpness using the / buttons. : Clear Soft memo This item can be selected only at a video signal. Adjust the whole color using the / buttons. : Strong Weak memo This item can be selected only at a video signal. : Green Red memo This item can be selected only at a video signal. (This table is continued to the following page. ) COLOR TINT 24 Multifunctional Settings (continued) PICTURE-1 Menu (continued) Item Description Select a command to load or save using the / buttons, and then press the (or the ENTER) button to perform the function. : LOAD1 SAVE1 MY MEMORY LOAD2 SAVE2 LOAD3 SAVE3 LOAD4 SAVE4 This projector has 4 numbered memories for adjustment data. Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment data on the memory whose number corresponds with the command's number. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the memory whose number corresponds with the command's number, and adjusts the picture automatically depending on the data. Select the EXECUTE using the button to reset the PICTURE-1 menu items. : EXECUTE CANCEL The items of the PICTURE-1 menu are collectively returned to the initial setting. Note that the items "MY MEMORY" and "GAMMA" of the CUSTOM menu under the item "GAMMA" are not reset. RESET 25 Multifunctional Settings (continued) PICTURE-2 Menu With the PICTURE-2 menu, the items shown in the table below can be performed. [. . . ] Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable. Use the cable that fulfills the specification shown in the previous page. Turn on the computer power supply and after the computer has started up, turn on the projector power supply. Communications Setting 19200bps, 8N1 1. Protocol Consist of header (7 bytes) + command data (6 bytes). 2. [. . . ]