User manual HITACHI CPX1498MS

[. . . ] Should it be necessary to change the mains plugs, this must be carried out by a competent person, preferably a qualified electrician. If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply. WARNING: THIS EQUIPMENT MUST BE EARTHED IMPORTANT The wires in the mains lead are coloured in accordance with the following code; Green and Yellow= Earth, Blue = Neutral, Brown = Live Green and Yellow to Earth Brown to Live Fuse Blue to Neutral Cord Clamp As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the EARTH symbol or coloured GREEN or GREEN and YELLOW. The wire coloured BLUE must be connected to the terminal with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. E 3 ENGLISH BEFORE OPERATING THIS EQUIPMENT ENGLISH SET-UP INSTRUCTIONS Connect your equipment to the desired sockets of this monitor REAR VIEW A. C. [. . . ] The time that each input is displayed before the sequence continues (dwell time) is by the following procedure whilst in "main menu" : Press the 5 button three times. Press the 7 or 3 buttons to change to the "Option set-up" menu. In "Options set-up" menu : The AV input line will now be blue (indicating that this function is available for adjustment). Press the 7 or 3 buttons to change the timing between 5 and 300 seconds The menu will stay on the screen for 20 seconds if no other operation is applied or you can press MENU button again and the menu will disappear. The new settings are now stored automatically. a. d. Auto override To select the various inputs and suspend the auto function : a. Press the buttons 1, 2, or S to select and hold inputs 1, 2 or S respectively. For each selection "HOLD" will be displayed. Another input can be held whilst the display is on alternative c. To remove "hold" and resume operation press the button that was selected for hold. 9 ENGLISH Input select, Selection of video and audio inputs a. Press the MENU button once and the "main menu" will then appear on the screen as shown with the input select line coloured blue (indicating that this function is available for adjustment). Press the 7 or 3 buttons to show either "auto" or "manual". Option selection a. Press the MENU button once and the "main menu" will then appear on the screen as shown with the input select line coloured blue (indicating that this function is available for adjustment). Press the 7 or 3 buttons to change to the "Option set-up" menu. The AV input line will now be blue (indicating that this function is available for adjustment). Press the 7 or 3 buttons to change to the video/audio inputs options required i. e. 12S, -2S, 1-S, 12-, 1--, -2-, --S For reference: 1 refers to input 1, 2 refers to input 2 and S refers to the SVHS input. The menu will stay on the screen for 20 seconds if no other operation is applied or you can press MENU button again and the menu will disappear. The new settings are now stored automatically. Press the MENU button once and the "main menu" will then appear on the screen as shown with the input select line coloured blue (indicating that this function is available for adjustment). Press the 7 or 3 buttons to change to the alternative language options required i. e. English, German, Spanish, Dutch, Italian and Symbol. [. . . ] Repeat this procedure for all the remaining characters that you require up to 16 characters. The menu will stay on the screen for 40 seconds if no other operation is applied or you can press MENU button twice and the menu will disappear. The new settings are now stored automatically. No sync This is displayed in the middle of the screen when there is no sync or video on the selected input. [. . . ]