User manual HITACHI CP-X2 TECHNICAL SPECIFICATIONS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI CP-X2. We hope that this HITACHI CP-X2 user guide will be useful to you.
Lastmanuals help download the user guide HITACHI CP-X2.
Manual abstract: user guide HITACHI CP-X2TECHNICAL SPECIFICATIONS
Detailed instructions for use are in the User's Guide.
[. . . ] · Automatically adjustment may not function correctly with some input signals. · The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.
Initial set signals
Initial set signals
The following signals are used for the initial settings. The signal timing of some PC models may be different. [. . . ] 2 Get Read projector internal setup value. 6 Execute Run a command.
Requesting projector status (Get command) () Send the following request code from the PC to the projector. Header+Commanddata(`02H'+`00H'+type(2bytes)+`00H'+`00H') (2) The projector returns the response code `1DH'+data(2bytes) to the PC. Changing the projector settings (Set command) () Send the following setting code from the PC to the projector. eader+Commanddata(`01H'+`00H'+type(2bytes)+settingcode(2bytes)) H (2) The projector changes the setting based on the above setting code. (3) The projector returns the response code`06H'to the PC. Using the projector default settings (Reset Command) () The PC sends the following default setting code to the projector. Header+Commanddata(`06H'+`00H'+type(2bytes)+`00H'+`00H') (2) The projector changes the specified setting to the default value. (3) The projector returns the response code`06H' to the PC. Increasing the projector setting value (Increment command) () The PC sends the following increment code to the projector. Header+Commanddata(`04H'+`00H'+type(2bytes)+`00H'+`00H') (2) The projector increases the setting value on the above setting code. (3) The projector returns the response code `06H' to the PC.
8
Command Control via the Network (continued)
Decreasing the projector setting value (Decrement command) () The PC sends the following decrement code to the projector. Header+Commanddata(`05H'+`00H'+type(2bytes)+`00H'+`00H') (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code `06H' to the PC. When the projector cannot understand the received command When the projector cannot understand the received command, the error code `15H' is sent back to the PC. Sometimes the projector cannot properly receive the command. [. . . ] Following is a sample if the authentication password is set to "password" and the random 8 bytes are "a572f60c". 2) Receive the random 8 bytes "a572f60c" from the projector. 3) Bind the random 8 bytes "a572f60c" and the authentication password "password" and it becomes "a572f60cpassword". [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI CP-X2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI CP-X2 will begin.
