User manual HITACHI CP-X2011
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI CP-X2011. We hope that this HITACHI CP-X2011 user guide will be useful to you.
Lastmanuals help download the user guide HITACHI CP-X2011.
You may also download the following manuals related to this product:
HITACHI CP-X2011 (2602 ko)
HITACHI CP-X2011 DATASHEET (270 ko)
HITACHI CP-X2011 TECHNICAL SPECIFICATIONS (1617 ko)
Manual abstract: user guide HITACHI CP-X2011
Detailed instructions for use are in the User's Guide.
[. . . ] Projector
User's Manual (detailed) Operating Guide
Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. [. . . ] The message "ARE YOU SURE YOU WISH TO CHANGE RESOLUTION?" appears. The horizontal and vertical positions, clock phase and horizontal size will be automatically adjusted. (6) To revert back to the previous resolution without saving changes, move the cursor to CANCEL on screen and press the or ENTER button. The screen will then return to the RESOLUTION menu displaying the previous resolution. · For some pictures, this function may not work well.
From the SETUP menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor button or ENTER button to execute the item. Then perform it according to the following table.
Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself. When the slant of the projector is changed, execute this function again. · The adjustable range of this function will vary among inputs. · When V:INVERT or H&V:INVERT is selected to the MIRROR item AUTO KEYSTONE in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly. (EXECUTE) · When the zoom adjustment is set to the TELE (telephoto focus), this function may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible. · When the projector is placed on the level (about ±3°), this function may not work. · When the projector is inclined to near ±30 degree or over, this function may not work well. · This function will be unavailable when the Transition Detector is on (50). Shrink the bottom of the image ó Shrink the top of the image · The adjustable range of this function will vary among inputs. · When the zoom adjustment is set to the TELE (telephoto focus), this function may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible. · This function will be unavailable when the Transition Detector is on (50). NORMAL ó ECO · When the ECO is selected, acoustic noise and screen brightness are reduced.
(continued on next page) 34
Description Using the / buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is on and MIRROR status is changed, TRANSITION DETECTOR ON alarm (50) will be displayed when projector is restarted after the AC power is turned off. Using / buttons switches the standby mode setting between NORMAL and SAVING. [. . . ] After cleaning or changing the air filter, please be sure to reset the filter timer. After the remedy, reset the power to ON.
Lighting In Green
Alternative blinking in Red
There is a possibility that the interior portion has become overcooled.
Please use the unit within the usage temperature parameters (5°C to 35°C). After the treatment, reset the power to ON.
NOTE · When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI CP-X2011
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI CP-X2011 will begin.