User manual HITACHI CP-X256

[. . . ] Projector CP-X256/CP-X265 User's Manual ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] When off is selected, all audio ports do not work for the input port. () RGB ó RGB ó COMPONENT ó S-VIDEO ó VIDEO () ó ó 3 ó AUDIO 36 SCREEN Menu SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Select an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table. Item Description Using the buttons / switches the OSD (On Screen Display) language. ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO NORSK ó NEDERLANDS ó PORTUGUÊS ó ó ó ó SVENSKA ó LANGUAGE SUOMI ó POLSKI ó TÜRKÇE MENU POSITION Using the buttons /// adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 0 seconds. Using the buttons / switches the mode for the blank screen. The blank screen is a screen for the temporarily blanking feature (22). It is displayed by pressing the BLANK button on the remote control. MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK BLANK MyScreen is a screen you can register as a desired screen. The ORIGINAL screen is the existing standard screen. BLUE, WHITE and BLACK are non-patterned (plain) screens in each color. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes. · For the MyScreen, please refer to the MyScreen item (38). 37 SCREEN Menu SCREEN Menu (continued) Item Description Using the buttons / switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF MyScreen is a screen you can register as a desired screen. The ORIGINAL screen is the existing standard screen. When TURN OFF is selected, the BLACK screen is used. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it will change to the BLACK screen. · For the MyScreen, please refer to the item MyScreen below. For the BLANK screen, please refer to the BLANK item (37). · This function will be unavailable and fixed to Myscreen when MyScreen Password in the Security Menu is on. This item functions for capturing the MyScreen of the blank screen and the start-up screen. [. . . ] Neither sounds nor pictures are outputted. , 3 Signal source does not correctly work. Correctly set up the signal source device by referring to the manual of the source device. ­ The input changeover settings are mismatched. Select the input signal, and correct the settings. 6 8, 9 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page , 3 The signal cables are not correctly connected. Correctly connect the audio cables. The MUTE function is working. Sound does not come out. Restore the sound pressing the MUTE or VOLUME button on the remote control. [. . . ]