User manual HITACHI CP-X268A

[. . . ] Projector CP-X268A User's Manual ­ Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] High ó Low Allocates the audio ports. Choose a picture input port using the buttons / (1), then select the audio port to be interlocked with the input port using the buttons / (2). When off is selected, all audio ports do not work for the input port. () RGB ó RGB ó MIU ó COMPONENT ó S-VIDEO ó VIDEO () ó ó 3 ó ó M M is abbreviation of MIU. AUDIO 38 SCREEN Menu SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Select an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table. Item Description Using the buttons / switches the OSD (On Screen Display) language. ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO LANGUAGE NORSK ó NEDERLANDS ó PORTUGUÊS ó ó ó ó SVENSKA ó SUOMI ó POLSKI ó TÜRKÇE MENU POSITION Using the buttons /// adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 0 seconds. Using the buttons / switches the mode for the blank screen. The blank screen is a screen for the temporarily blanking feature (24). It is displayed by pressing the BLANK button on the remote control. MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK BLANK MyScreen is a screen you can register as a desired screen. The ORIGINAL screen is the existing standard screen. BLUE, WHITE and BLACK are non-patterned (plain) screens in each color. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes. · For the MyScreen, please refer to the MyScreen item (40). 39 SCREEN Menu SCREEN Menu (continued) Item Description Using the buttons / switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF MyScreen is a screen you can register as a desired screen. The ORIGINAL screen is the existing standard screen. When TURN OFF is selected, the BLACK screen is used. · To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it will change to the BLACK screen. · For the MyScreen, please refer to the item MyScreen below. For the BLANK screen, please refer to the BLANK item (39). [. . . ] Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (45) to reset all settings to factory default. Then, if the problem is not removed after the remedy, please contact your dealer or service company. CR/P CB/P B SD CA RD R VIDE S-VI O AU DE O RG B IN AU 1 DI DIO O IN 1 IN2 AU DC I/O 5V X 0. 5 RG A B IN 2 LAN CO NT RG B OU RO L T AU DIO OU T . 3. US B Phenomenon Cases not involving a machine defect Reference page 5 9 The electrical power cord is not plugged in. Correctly connect the power cord. Power does not come on. The power switch is not set to the on position. [. . . ]