User manual HITACHI D10VH

[. . . ] IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!This manual contains important information about product safety. Please read and understand this manual BEFORE operating the power tool. Please keep this manual available for other users and owners before they use the power tool. [. . . ] Service or maintenance performed by unqualified personnel could result in a risk of injury. (2) When servicing a tool , use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instruction may create a risk of electric shock or injury. Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. ALWAYS wear ear plugs when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss. NEVER touch the tool bit with bare hands after operation. NEVER wear gloves made of stuff liable to roll up such as cotton, wool, cloth or string, etc. NEVER place your hands, fingers or other body parts near the tool's moving parts. NEVER operate this tool without all guards or safety features in place and in proper working order. If maintenance or servicing requires the removal of a guard or safety feature, be sure to replace the guard or safety feature before resuming operation of the tool. Don't force small tool or attachment to do the job of a heavy-duty tool. Don't use tool for purpose not intended --for example-- don't use circular saw for cutting tree limbs or logs. NEVER use a power tool for applications other than those specified. NEVER use a power tool for applications other than those specified in the Instruction Manual. NEVER allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel. Do not use power tools if the plastic housing or handle is cracked. cracks in the tool's housing or handle can lead to electric shock. Such tools should not be used until repaired. Blades, cutting implements and accessories which have been mounted to the tool should be secure and tight. [. . . ] The bit rotates clockwise (viewed from the rear side) by pushing the R-side of the push Open button. End Wrench The L-side of the push button is pushed to turn the bit counterclockwise. A Side handle can be installed on either side of the tool for right or left handed use. To install the side handle, thread it into the M10 hole on the desired side of the gear cover and tighten it securely. [. . . ]