User manual HITACHI DESKSTAR 8 SIMPLE INSTALLATION GUIDE

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI DESKSTAR 8. We hope that this HITACHI DESKSTAR 8 user guide will be useful to you.

Lastmanuals help download the user guide HITACHI DESKSTAR 8.

Download

You may also download the following manuals related to this product:

HITACHI DESKSTAR 8 REFERENCE GUIDE (2661 ko)

HITACHI DESKSTAR 8 QUICK INSTALLATION GUIDE (109 ko)

Manual abstract: user guide HITACHI DESKSTAR 8SIMPLE INSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

 [. . . ] Below is an example of a typical tower design. 

6. 

Getting Started
IMPORTANT!Back up all data before beginning installation. 

Handling Precautions
Caution: Poor handling,  physical impact or electrical shock causes most premature hard disk drive failures. · Set the drive down gently to prevent damage from impact or vibration.  [. . . ] Find the mounting bracket inside the system where you will install the Hitachi Deskstar. version 1. 3

3. 

If the new Hitachi Deskstar drive will be the only hard disk drive on a cable in your system,  jumper the drive to Device 0 (MASTER). If you are adding the Hitachi drive to a cable with another hard drive,  jumper the Hitachi drive as Device 1 (SLAVE). 

Attach the Cables
Note: With some system cases,  it may be easier to attach the cables after the drive is mounted in the system. Attach the blue connector of the ATA IDE cable to the IDE connector marked "Primary" or "0" on the motherboard or controller card in your system. Attach a power cable to the hard disk drive. If the Hitachi Deskstar is the Device 0 (MASTER) drive,  attach the BLACK connector of the ATA/IDE cable to the hard disk drive. If the Deskstar is the Device 1(SLAVE) drive,  attach the GRAY connector of the ATA/IDE cable to the hard disk drive. 

2. 3. 

Begin the Software Installation
1. Confirm the drive is recognized in the System BIOS,  or,  if adding the drive as a Slave,  confirm it is recognized by the Operating System. Key strokes sequences for accessing your BIOS are often displayed at boot,  or can be found in your computer system manual. Verify correct detection of drive capacity. If your BIOS does not detect the Hitachi Deskstar,  shut down your system and review the installation procedure. If your drive is still not detected in BIOS,  contact the Hitachi Global Storage Technologies Support Center: www. HitachiGST. com/support

2. 

Mount the Drive
There are many variations of system cases. Hitachi Deskstar drive can be mounted with any side or end vertical or horizontal. Do not mount the drive in a tilted position. Place the drive in an empty drive bay,  and line up the 4-screw holes.  [. . . ] References in this publication to Hitachi Global Storage Technologies products,  programs or services do not imply that Hitachi Global Storage Technologies intends to make these available in all countries in which Hitachi Global Storage Technologies operates. Product information is provided for information purposes only and does not constitute a warranty. Information is true as of the date of publication and is subject to change.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI DESKSTAR 8

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI DESKSTAR 8 will begin.