User manual HITACHI DV-RX7000E(F)

[. . . ] DVD RECORDER Instruction Manual Model No. DV-RX7000E PROGRAM SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under license from Gemstar Development Corporation. Region number supported by this unit Region numbers are allocated to DVD players and software according to where they are sold. · The region number of this unit is "2". · The unit will play DVDs marked with labels containing "2" or "ALL". [. . . ] 2 Press the 34 button to select "Program" and then press the OK or 1 button. DVD-RAM(VR) SHOWVIEW Standard Timer SHOWVIEW Extended : Program · Source: The video input source (AV1, AV2, AV3 AV4 or DV), or the broadcasting channel you want to make a timer recording from. · Start/End Time: Start and end time of the timer recording. Weekly: Records at a set time every week. · V/P: VPS (Video Program System) or PDC (Program Delivery Control) function. DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. Source 01 Date CH 09 11/22 Source PR 01 CH 05 12/10 Start --Type V/P 12 --/-00 :Once On Start End Type Mode V/P Edit No. 01 09:22AM 10:30AM Once SP Date 01/ 01 12:30AM 09:00PM Weekly LP End 14 : 00 --:-- -- --:-- -- -Mode SP -- MOVE OK RETURN EXIT MOVE OK RETURN EXIT 3 Press the 34 button to select "Standard Timer" and then press the OK or 1 button. the 34 button to select 4 Press the OKRecordbutton. and then "Scheduled List", press or 1 DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. Source 01 -- -Date --- -Start End Type -Mode V/P Edit ----:-- --:-- - If you set this function on, you can control the starting and ending time of recording by special signal included in the broadcasting signal. If a TV program is shortened or starts earlier or later than scheduled, this function synchronizes the starting and ending time of recording with the actual broadcasting time automatically. - Set up the start-time EXACTLY according to the published TV schedule. Otherwise the timer recording will not take place. - Do not select PDC or VPS unless you are sure the program you wish to record is broadcast with PDC or VPS. Mode (Recording Mode) - FR: Select when you want to set video quality automatically. It depends on the remaining time on the DVD. - XP (high quality): Select when audio and video qualities are important. 1 hour) - SP (standard quality): Select to record in standard quality. 2 hours) - LP (low quality): Select when a long recording time is required. 4 hours) - EP (extended mode): Select when a longer recording time is required. (Approx. 6 hours) MOVE OK RETURN EXIT DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. Source 01 Date CH 09 11/22 Source PR 01 CH 05 12/10 Start --Type V/P 12 --/-00 :Once Off Start End Type Mode V/P Edit No. 01 09:22AM 10:30AM Once SP Date 01/ 01 12:30AM 09:00PM Weekly LP End 14 : 00 --:-- -- --:-- -- -Mode SP -- MOVE OK RETURN EXIT 42 - English 6 Press the OK button. · will appear on the front panel. It means that a timer recording is registered. If you make a mistake Press the 2 1 button to select the item you want to change. If the timer settings overlap The programs are recorded in order of priority. [. . . ] · Check for the DVD/TV selection button. Press the ( ) and ( ) buttons on your DVD recorder simultaneously when the power is on. All settings including the password will revert to the factory settings. Do not use this unless absolutely necessary. [. . . ]