User manual HITACHI DV-RX7000E(UK)

[. . . ] DVD RECORDER Instruction Manual Model No. DV-RX7000E (UK) PROGRAM VIDEO Plus+ and PlusCode are registered trademark of Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under licence from Gemstar Development Corporation. Region number supported by this unit Region numbers are allocated to DVD players and software according to where they are sold. · The region number of this unit is "2". · The unit will play DVDs marked with labels containing "2" or "ALL". [. . . ] It depends on the remaining time on the DVD. - XP (high quality): Select when audio and video qualities are important. 1 hour) - SP (standard quality): Select to record in standard quality. 2 hours) - LP (low quality): Select when a long recording time is required. 4 hours) - EP (extended mode): Select when a longer recording time is required. 6 hours) MOVE OK RETURN EXIT DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. Source 01 Date CH 09 11/22 Source PR 01 CH 05 12/10 Start --Type V/P 12 --/-00 :Once Off Start End Type Mode V/P Edit No. 01 09:22AM 10:30AM Once SP Date 01/ 01 12:30AM 09:00PM Weekly LP End 14 : 00 --:-- -- --:-- -- -Mode SP -- MOVE OK RETURN EXIT English - 41 6 Press the OK button. · will appear on the front panel. It means that a timer recording is registered. If you make a mistake Press the 2 1 button to select the item you want to change. If the timer settings overlap The programmes are recorded in order of priority. If timer recording is set for the first programme and then again for the second programme and both programmes overlap, the following message will appear on the screen: "This setting is identical with 1. " The message shows that the first programme has priority. After recording of the first programme is complete, the second programme starts being recorded. To exit without saving the current setting Press the MENU button. To return to the previous menu Press the RETURN button if you don't want to set a timer recording. Editing a Standard Timer Follow these directions to edit the timer record list. 1 Press the MENU button. to select 2 Press the 34 buttonpress the OK or 1 "Program" and then button. DVD-RAM(VR) VIDEO Plus + Record Standard Timer VIDEO Plus+ Record Extended : Off Program Recording the timer 7 Turn the power off to finishwill not work, recording. Timer recording when the power on. · will blink if disc is not inserted. MOVE OK RETURN EXIT The timer recording time may differ from the set time depending on disc status and overall timer NOTE recording status (for example, recording times overlapping, or when the previous recording ends within 2 minutes before the start time of the next recording. ) The maximum number of programmes that can be preset for the time is 12. 34 button 3 Press thebutton. andto select the "Standard Timer", then press OK or 1 DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. Source 01 PR 01 02 -- -Date 01/ 01 --- -Start 12:00 End 14:00 Type Once -Mode V/P Edit SP -Off -- --:-- --:-- MOVE OK RETURN EXIT button to select the 4 Press the 34 timer recording or 1want number of the you to edit, and then press the OK button. · The Edit and Delete items are displayed. DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. Source 01 PR 01 02 -- -Date 01/ 01 --- -Start 12:00 End 14:00 Type Once -Mode V/P Edit Off SP Edit Delete -- -- --:-- --:-- MOVE OK RETURN EXIT 42 - English the 5 Presspress34 button to select Edit, and then the OK button. · The Timer Recording screen is displayed. See the "Making a Standard Timer" section for more information on Timer Recording Input items. DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. Source 01 02 Date CH 09 11/22 Source PR 01 CH 05 12/10 Start --Type V/P 12 --/-00 :Once Off Start End Type Mode V/P Edit No. 01 09:22AM 10:30AM Once SP Date 01/ 01 12:30AM 09:00PM Weekly LP End 14 : 00 --:-- -- --:-- -- -Mode SP -- Deleting a Standard Timer Follow these directions to delete an entry from the timer record list. MOVE OK RETURN EXIT 6 Press the OK button to confirm the edited setting. 1 Press the MENU button. to select 2 Press the 34 buttonpress the OK or 1 "Program" and then button. [. . . ] DON'T listen to headphones at high volume, as such use can permanently damage your hearing. DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DON'T use makeshift stands and NEVER fix legs with wood screws -- to ensure complete safety always fix the manufacturer's approved stand or legs with the fixings provided according to the instructions. [. . . ]