User manual HITACHI HDC-571E(ARGOS)

[. . . ] HDC-571E 5. 0 2. 48" FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Select [Single], [All], or [Select] with the / buttons, and press the OK button. Select [Unlock] with the / buttons, and press the OK button. The removal of image protection is executed and the camera returns to the previous menu mode. Formatting an SD/SDHC memory card or internal memory overrides protection, and erases all images regardless of their protected status. EN-23 DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. Select the image that you want to set DPOF with the / buttons. Select [DPOF] with the / buttons, and press the OK button. Select [Single] or [All] with the / buttons, and press the OK button. [Single]: Sets DPOF for each individual image. [All]: Sets DPOF for all images at once. Select [Print Num] with the / buttons, and press the OK button. This displays the number of prints setting screen. Set the number of prints with the / buttons, and press the OK button. You can set up to 99 prints for each image. This creates a file containing the DPOF information, and when the operation is finished, the screen returns to the playback mode. The DPOF icon [P] is displayed on each image that has set up DPOF settings. Play Next Menu Delete Copy to Card Next Menu Slide Show 3 sec. Next Menu DPOF Protect Next Menu Thumbnail Next Menu DPOF Single All DPOF Single Print Num 00 100-0001 EN-24 Erasing Images Erasing single image / Erasing all images 1. The last image will be displayed on the screen. Select the image you want to erase with the / buttons. Select [Delete] with the / buttons and press the OK button. Select [Single], [All], or [Select] with the / buttons, and press the OK button. [Single]: Erases the selected image or the last image. [. . . ] The last image will be displayed on the screen. Select the image you want to erase with the / buttons. Select [Delete] with the / buttons and press the OK button. Select [Single], [All], or [Select] with the / buttons, and press the OK button. [. . . ]