User manual HITACHI L19H01UB

[. . . ] Instruction Manual 19"/22" HD Ready LCD TV with Built-in Digital Tuner L19H01 UB/UW/CB/CW L22H01 UB/UW/CB/CW GB Safety Warnings SOME DO'S AND DON'TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ------------------------------------------------------------------------------------------------------------------------------DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between the pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and withdraw the mains plug before making or changing connections. [. . . ] If the module is not inserted properly, a warning message will show on the screen to remind the users. If you have inserted a module, please ensure it is fully inserted in the correct manner as mentioned in Step 2 above. The functions that now appear on screen are dependent on the contents of the selected Conditional Access Module in your country. Refer to the instruction supplied with the module or contact the vendor. Common interface Connectors at rear of TV(facing downward) ANTENNA Module (CAM) 19 Specifications Troubleshooting HDMI 1 HDMI 2 Using The TV Features Using The Features the module slot. Installing the LCD TV Introducing the LCD TV The Conditional Access Module (CAM) menu provides access to functions contained on the CAM. The module can be inserted into the Common Interface (CI) slot located at the backside (facing downwards) of the TV. Preparation Preparation Introducing the LCD TV Installing the LCD TV Using The Features Using The TV Features Troubleshooting Specifications Chapter 3 Using The Features BASIC OPERATION Tuning in the TV channels After connecting an aerial to your LCD TV and connecting the mains cable to the TV and 100-240V AC mains socket, turn the POWER SWITCH on (the | position) at the rear panel of the TV, and the red light will show on the front centre panel of the TV. Press the STANDBY button, and the red light will change to blue and the Installation screen will show: MENU Audio Setup Auto installation PN "0000" Country select Start Search OK LHD01 MENU button on the remote to start the "Auto Installation". (The default PIN is "0000") stored in the memory. To power off press the STANDBY button, the blue light will change back to red. Selecting a Source Press the INPUT button to display the function required ( TV/SCART/AV(YPbPr)/HDMI1/HDMI2/VGA ). buttons on the remote control or the buttons on the LCD TV to change the TV channels. You can directly select the TV channel required by pressing 1, 2, or 3 etc on the remote . Adjusting the Volume Press the VOL. +/- buttons on the remote control or the / buttons on the LCD TV to adjust Note 20 Chapter 3 Using The Features Sleep Timer Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the OFF, 30, 60, 90 or 120 minutes. When the LCD TV has reached the set time, it will automatically turn off. If the TV has no input signal, it will automatically power down to standby after 15 minutes OSD Menu Operation 1 The main menu provides access to the following menus: Adjust Audio setting such as Audio Mode, Treble, Bass, Balance, Headphone Volume AVC(Auto Volume Control). Adjust picture setting such as Picture Mode, Contrast, Brightness, Colour, Hue(NTSC), Sharpness, Phase, Colour Temp, Digital Processing. Adjust Channel setting such as Auto Installation, Manual Installation, Update Installation, Child Lock, Digital subtitle, Digital language, Edit Channel, Time Base and CI informatiom. Adjust preferences such as OSD langeuage, Sleep Timer and Default. Audio Picture Setup Option 2 Press the MENU button on the remote control. The main menu will appear on the screen. 3 Use Use buttons to highlight your main menu option, then press OK button to enter your selected option. buttons to highlight an option of the sub-menu. Use buttons to change the value of the item. Press the EXIT button to exit menu. Audio Use the Audio setting menu to adjust the audio quality which best corresponds to your listening requirements. The Audio Menu includes the following options: Audio Mode There are five options available: Movie/ Multimedia/ Music /Speech/Personal. Treble Bass Balance Adjust treble for enhancement of high frequency output. [. . . ] Switched on your TV and any other connected equipment. EJECT DVD MENU Press Press to select the channel which you want to skip (uninstall). Press the Green button to skip(uninstall) that channel. Press green key again to unskip the selected channel. TEXT DVD SUBTITLE ZOOM AUDIO REPEAT ANGLE LHD01 Tuned in all available channels. This is an example of the channel order in digital TV mode. Satellite/Cable Channel 7 . . . . . . . . . . . . . . [. . . ]