User manual HITACHI L47VG10U

[. . . ] 4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The TV will switch to the selected programme. To select programmes between 10 - 1000 (for IDTV) or 10-199 (for analogue), press the numeric buttons consecutively. Press directly the programme number to reselect single digit programmes. Initial Settings When the TV is turned on for the first time, it is in the digital mode. Because this is the first time the TV is used, there are no channels stored in the memory and the following message appears on the screen. Basic Operations You can operate your TV using both the remote control and onset buttons. Operation with the Buttons of the TV Volume Setting · Press " " button to decrease volume or button to increase volume, so a volume level scale (slider) will be displayed on the screen. · To select the "Yes" or "No" option, highlight the item by using " " or " " buttons and press OK button. The IDTV will automatically tune to the transmission channels, searching for digital terrestrial TV broadcasts and displaying the names of channels found. To cancel searching, you can press MENU button at any time during the process. The following OSD will be displayed during the automatic search: Programme Selection · Press "P/CH +" button to select the next programme or "P/CH -" button to select the previous programme. Viewing Main Menu · Press and buttons at the same time to view main menu. In the main menu select submenu using "P/CH -" or "P/CH +" buttons and enter " or " " buttons. the sub-menu using " To learn the usage of the menus, refer to the menu system sections. AV Mode · Press the "TV/AV" button in the control panel on the TV to switch between AV modes. English - 15 - After Automatic Search is completed, the following message, asking for analogue channel search, appears on the screen. General Operation Press the SOURCE button and select DTV from the list. The TV then switches to digital TV mode. Information Screen · Whenever you change the channel using the P + or P - button or numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen. Day): displays the programmes of previous day. GREEN button (Next day): displays the programmes of the next day. YELLOW button (Zoom): Expands programme information. BLUE button: displays filtering options. INFO (Details): displays the programmes in detail. OK (View): shows the highlighted channel / views options. Numeric buttons (Jump): go to preferred channel directly via numeric buttons. 0 (SEARCH): activates "Guide Search" window Displaying Subtitles With digital terrestrial broadcasting (DVB-T), some programmes are broadcast with subtitles. Note: You can enable subtitles by pressing the SUBTITLE button. Digital Teletext · Press the TELETEXT ( ) button. · The digital teletext information appears. · Operate it with the coloured buttons, " " / " " / " " / " "buttons and OK button. The operation method may differ depending on the contents of the digital teletext. [. . . ] Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable?Check if you have entered the correct frequency. The picture quality may degrade when two peripherals are connected to the TV at the same time. [. . . ]