User manual HITACHI MP-EG10W

[. . . ] Instruction Manual MP-EG10W Hitachi America, LTD. 2000 Sierra Point Parkway Brisbane, Ca 94005-1835 Hitachi Sales Corporation of Hawaii 3219 Koapaka St, Honolulu, HI 96819 Tel. 808-836-3621 HITACHI (HSC) CANADA INC. 6740 Campobello Road, Mississauga, Ontario L5N 2L8 CANADA Tel. [. . . ] * Using the MACRO/SHIFT button allows you to change multiple files to the same recording date/time in one step. 1 3 2 6 4 5 6 1 Display the file select screen. Press w or v with the FOLDER select screen to select the folder containing the file where you want to correct the recording date/time, and then press s. The file select screen will appear. E75 Chapter 4 Using Media Navigation (Playback) ______ 2 Display the menu and select CHG TIME. Press the MENU button to display the menu, and press w to select CHG TIME. 3 Display the screen for correcting the recording date/time. Press s. The menu will disappear and the screen for correcting the recording date/time will appear. 4 Select the file where you want to correct the recording date/time. Press w or v to select the file whose recording date/time you want to correct, and then press s. You can select multiple files by pressing the MACRO/SHIFT button (see page 45). 5 Correct the recording date/time. The month displayed in the selected file will be highlighted. Press s or t to highlight the number you want to correct, and then press w or v to increase or decrease it. * The seconds display counts up or down in 2-second units. 6 Enter the corrected date/time. After correcting all the incorrect numbers, press the REC/PAUSE button. You can continue to change file recording date/time by repeating steps 4 - 7. * To cancel change of recording date/time, press the MENU button before pressing REC/PAUSE. The recording date/time will not change, and recording date/time change menu will finish. 7 Exit the CHG TIME menu item. Press the t button or MENU button. Press t exits the recording date/time correct menu item and restores the file function setting menu (the screen in step 2). Pressing MENU exits the recording date/time correct menu item and restores the file select screen (shown in step1). E76 ______Chapter 4 Using Media Navigation (Playback) Moving to Setting You can move to the screen for setting up during file playback or Media Navigation. * You can also use the remote control to operate. 1 1 2 3 1 Display the menu and select SET UP. Press the MENU button to display the menu, and press w to select SET UP. * Pressing MENU during file playback will also display the SET UP screen. 2 Select the setting item you want to modify. The following setting items can be modified: · MPEG MODE (FINE/STND) · DATE · ENERGY SAVE · DISPLAY · LCD · PICTURE ADJ SET UP sINI T I AL D I SPLAY LCD P I CTURE SEL ENTER ON ON ADJ MENU EXIT 3 Modify the setting. See the following pages for ways to modify the settings. · MPEG MODE (FINE/STND) (See page 94) · DATE (See page 24) · ENERGY SAVE (See page 98) · DISPLAY (See page 99) · LCD (See page 100) · PICTURE ADJ (See page 101) E77 Chapter 4 Using Media Navigation (Playback) ______ To designate files in folder for repeat play_________________ * Start Media Navigation (see page 42) and display the FOLDER select screen to start. * You can also use the remote control to operate. * Using the MACRO/SHIFT button allows repeat play of multiple files at one time. 1 Select a folder. Press w and v with the FOLDER select screen to select the folder containing the files for repeat, and then press s. The file select screen will appear. 2 Select a file. Use v or w to select the file for repeat play. You can select multiple files by pressing the MACRO/SHIFT button (see page 45). 3 Display the menu. Press the MENU button to display the menu, and press w to select REPEAT. 4 Start repeat play. Press v to select REPEAT, and press s. The selected file will be repeatedly played back. If multiple files are selected, repeat play will be started from the file at the end of list. 5 E68 Finish repeat play. Press t. Repeat play will finishe, and the FOLDER select screen will be restored. ______Chapter 4 Using Media Navigation (Playback) Locating Starts of a Series of Files and Playing Them (SLIDE) You can project slides of files (locate beginnings of a series of files) in folder. There are two ways of projecting slides: all files in the folder or specified files in the folder. To project slides of all files in folder______________________ * Start Media Navigation (see page 42) and display the FOLDER select screen to start. [. . . ] r Zoom bar: This appears when the ZOOM/VOL button is pressed during recording, and indicates the zoom setting among 10 settings from W (wide) to T (tele), and M (macro). The magnification in the optical zoom range is shown in white, that in the digital zoom range in yellow, and that in the macro range in purple. 2 1 t y u i o !0 !1 !2 If zoom is pressed, the zoom bar will be displayed for three seconds even when the indicator "OFF" appears in the on-screen display (see page 100). Operating mode: This indicates what mode the MP-EG10W is in currently - recording, playback, etc. See "Operating Mode Indicators" (on page 18) for details. [. . . ]