User manual HITACHI MPEG1A

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Press the button to display the previous 10th image. Press and hold the previous or next images automatically in sequential order. Release the / buttons if you wish to stop the automatic playback. If the total number of images is less than 10, press the press the button jumps to the last image. Video clips will be displayed with an [ ] icon. button jumps to the first image and EN-20 Removing Red-eye You can use this function to remove the red-eye effect after an image is taken. Select the image that you want to edit with the / buttons. Select [Fix Red Eyes] with the / buttons, and press the SET button. Select [Execute] with the / buttons, and press the SET button. View the changes on the corrected image. To save your corrected image, select [Confirm] with the / buttons, and press the SET button. When this process ends, this replaces the original image with the corrected image. Dynamic Lighting Feature This feature compensates for the unfavorable lighting conditions by brightening underexposed areas and balancing overexposed areas. Select the image that you want to edit with the / buttons. Select [Single] or [All] with the / buttons, and press the SET button. [Single]: Sets DPOF for each individual image. [All]: Sets DPOF for all images at once. Select [Print Num. ] with the / buttons, and press the SET button. This displays the number of prints setting screen. Set the number of prints with the / buttons, and press the SET button. Select [Date Print] with the / buttons, and press the SET button. Select date to [On] or [Off] with the / buttons, and press the SET button. [On]: The date of the image will also be printed. [Off]: The date of the image will not be printed. The DPOF icon [ ] is displayed on each image that has set up DPOF settings. MENU SET DPOF MENU SET 0 MENU SET 2 110-0201 The date that is printed on the image is the date set on the camera. [. . . ] 110-0201 2 The last image appears on the screen. Press the button to display the next 10th image. If the 1st image taken is displayed, press the button to playback the 11th image taken. Press the button again to playback the 21th image taken and so forth. [. . . ]