User manual HITACHI R-Z440ARU6

[. . . ] WARNING Before using this product, be sure to read all manuals for this product. After reading them, store them in a safe place for future reference. Features This projector has the network function that brings you the following main features. Network Presentation : allows the projector to project computer images transmitted through a network. ( 37) Web Control : allows you to monitor and control the projector through a network from a computer. ( 45) My Image : allows the projector to store up to four still images and project them. [. . . ] The "LiveViewer" allows you to project images from one or multiple computers by connecting the projector to an existing network without using computer cables. This Network Presentation feature helps you to smoothly make your presentations and conduct conferences. To start the Network Presentation, select the LAN port as the input source on the projector and click the Starting Capture button on the "LiveViewer". 2. 2. 1 Display mode Two display modes, Single PC mode and Multi PC mode, are available for the Network Presentation. 1) Single PC mode The projector displays images sent by one computer. 43 2. Network Presentation 2. 2 Starting the Network Presentation (continued) 2) Multi PC mode The projector screen is divided to 4 zones. The projector displays images in one zone sent by a computer, so that the projector can display images sent by up to 4 computers at the same time. 1 3 2 4 2. 2. 2 Presenter mode In the Single PC mode, the projector can be occupied by one computer and can block an access from any other computer, if the Presenter mode is selected in the "LiveViewer". While making your presentation, you don't need to worry that the image on screen is unexpectedly switched to an image sent by another computer. The Presenter mode can be set on the Option menu in the "LiveViewer" main menu. ( 41) 2. 2. 3 Display User Name A "User Name" can be input in the "LiveViewer", which is displayed on screen by operating the menu on the projector. So, it can be found out whose image is currently displayed on screen. Web Control You can adjust or control the projector via a network from a web browser on a computer that is connected to the same network. Configures the subnet mask when DHCP is disabled. Configures the default gateway when DHCP is disabled. The length of the Projector Name can be up to 64 alphanumeric characters. Only alphabets, numbers and following symbols can be used. !"#$%&'()*+, -. /:;<=>?@[\]^_`{|}~ and space. Particular projector name is pre-assigned by default. Configures the location to be referred to when using SNMP. The length of the sysLocation can be up to 255 alphanumeric characters. Only numbers `0-9' and alphabet `a-z', `A-Z' can be used. Configures the contact information to be referred to when using SNMP. The length of the sysContact can be up to 255 alphanumeric characters. [. . . ] NOTE · As for the transmission of the second or subsequent commands, the authentication data can be omitted when the same connection. 88 8. Troubleshooting Problem Likely Cause The projector is not turned on. The projector's input source isn't switched to LAN. Things to Check Is the projector's lamp on? [. . . ]