User manual HITACHI R-Z570ARU7 annexe 1

[. . . ] After reading them, store them in a safe place for future reference. Features This projector has the network function that brings you the following main features. Network Presentation : allows the projector to project computer images transmitted through a network. ( 37) Web Control : allows you to monitor and control the projector through a network from a computer. ( 45) My Image : allows the projector to store up to four still images and project them. ( 70) Messenger : allows the projector to display text sent from a computer through a network. [. . . ] r Display User Name A "User Name" that is up to 20 letters can be input by using alphanumeric characters. The user name can be displayed on the projector screen, so you can find out whose image is currently on the screen. (Refer to NETWORK menu in the User's Manual ­ Operating Guide) If the check box is not marked, the information is not sent to the projector. 42 2. Network Presentation 2. 2 Starting the Network Presentation This chapter explains the Network Presentation feature with which you can project computer images transmitted through a network. The "LiveViewer" allows you to project images from one or multiple computers by connecting the projector to an existing network without using computer cables. This Network Presentation feature helps you to smoothly make your presentations and conduct conferences. To start the Network Presentation, select the LAN port as the input source on the projector and click the Starting Capture button on the "LiveViewer". 2. 2. 1 Display mode Two display modes, Single PC mode and Multi PC mode, are available for the Network Presentation. 1) Single PC mode The projector displays images sent by one computer. 43 2. Network Presentation 2. 2 Starting the Network Presentation (continued) 2) Multi PC mode The projector screen is divided to 4 zones. The projector displays images in one zone sent by a computer, so that the projector can display images sent by up to 4 computers at the same time. 1 3 2 4 2. 2. 2 Presenter mode In the Single PC mode, the projector can be occupied by one computer and can block an access from any other computer, if the Presenter mode is selected in the "LiveViewer". While making your presentation, you don't need to worry that the image on screen is unexpectedly switched to an image sent by another computer. Displays the DHCP configuration settings. Displays the ethernet MAC address. 48 3. Web Control 3. 3 Network Settings Displays and configures network settings. Item IP Configuration DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Enables DHCP. Configures the IP address when DHCP is disabled. Configures the subnet mask when DHCP is disabled. Configures the default gateway when DHCP is disabled. The length of the Projector Name can be up to 64 alphanumeric characters. Only alphabets, numbers and following symbols can be used. !"#$%&'()*+, -. /:;<=>?@[\]^_`{|}~ and space. Particular projector name is pre-assigned by default. Configures the location to be referred to when using SNMP. [. . . ] The projector's input source isn't switched to LAN. Things to Check Is the projector's lamp on?Check the network configurations of the computer and projector. If you change the projector's settings, turn off the projector's AC power and then turn it on again. [. . . ]