User manual HITACHI R-Z660ERU6XD

[. . . ] WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling. Please refer to the pages written following this symbol. NOTE · The information in this manual is subject to change without notice. [. . . ] For some input, this function may not work well. · When the zoom adjustment is set to the TELE (telephoto focus), this function may be excessive. This function should be used when the zoom adjustment is set to the full WIDE (wide-angle focus) whenever possible. · When the vertical lens shift is not set fully upward (not set fully downward for the optional lens type FL-601 only (45)), this function may not work well. · This function will be unavailable when the Transition Detector is on (51). Using the / buttons turns off/on the whisper mode. NORMAL ó WHISPER · When the WHISPER is selected, acoustic noise and screen brightness are reduced. Using the / buttons switches the mode for mirror status. KEYSTONE WHISPER MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (51) will be displayed when projector is restarted after the power switch is turned off. 36 AUDIO Menu AUDIO Menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the / cursor buttons on the projector or remote control, and press the cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. NOTE · The speaker sound may distorted or the case may be trembling when the volume is too high or treble/bass is emphasized or WOW is activated. MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK BLANK MyScreen ORIGINAL BLUE, WHITE, BLACK Feature Screen can be registered by the MyScreen item (40). Screen preset as the standard screen. Plain screens in each color. · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the plain black screen after several minutes. (continued on next page) 38 SCREEN Menu SCREEN Menu (continued) Item Description Using the / buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature Screen can be registered by the MyScreen item MyScreen START UP (40). ORIGINAL TURN OFF Screen preset as the standard screen. Plain black screen. · To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen (38) after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, the plain black screen is instead used. · When the TURN ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu (48), the START UP is fixed to MyScreen. (continued on next page) 39 SCREEN Menu SCREEN Menu (continued) Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. Selecting this item displays a dialog titled "MyScreen". [. . . ] No pictures are displayed. The brightness is adjusted to an extremely low level. Adjust BRIGHTNESS to a higher level using the menu function or the remote control. The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play monitor using another plug and play monitor. 0 The BLANK screen is displayed. Correctly connect the HDMI cable. No pictures or disturbed pictures are displayed on HDMI input. Press the BLANK button on the remote control. The HDMI cable is not correctly connected. Your HDMI equipment is not compatible with the projector This projector can be connected with another equipment that has HDMI or DVI connector, but with some equipment the projector may not work properly. Turn off the both equipment, and turn on them again Your HDMI equipment and the projector are not harmonized. [. . . ]