User manual HITACHI SBW100

[. . . ] Model Name SBW100 Soundbar and Wireless Subwoofer ENGLISH Owners Guide Thank you for purchasing this Hitachi product. Please read these instructions carefully. Keep this owners guide for future reference. Record the serial number of your Soundbar and Wireless Subwoofer Audio System for future reference. [. . . ] Make a pencil mark 1-1/2" or more below the bottom of TV. 10-7/16" 10-7/16" 3. Make a pencil mark on each side of centerline. 1-1/2" or more 4. Make another pencil mark on each side of centerline. 25/32" 10-7/16" 10-7/16" 5. Drill a ¼" hole in the wall at each of the four pencil marks. Hammer the 4 wall mount anchors into the holes the anchors should be flush with the wall. Now, using a Philips screwdriver, screw the wall brackets in place with the screws going into the anchors. Top To Wall (Anchors) 8. Tilting the bottom of the Soundbar slightly away from the wall, guide the brackets into the matching holes on the back of the Soundbar. The Soundbar is now securely wall mounted. [NOTES] The supplied mounting kit can be used for typical drywall construction. Mounting to wood, concrete, brick or other types of wall construction will require different hardware. Hitachi recommends seeking professional assistance for such installations. The instructions on this page and the supplied wall mount kit are only for the vertical wall mount. Professional assistance is required for other mounting or installation orientations (e. g. , horizontal, tilted). 7 Controls and Functions The controls and functions of the SBW100 and the Remote Control are explained below. Front Panel Controls / LED Indicators 1 2 3 4 5 6 7 8 9 10 11 1 12 13 REMOTE CONTROL Sensor Point your remote control at this area when you use the remote control. POWER ON Indicator Plug the power cord into the AC outlet. The Soundbar goes to the standby mode, and this indicator is also turned off. Press the POWER button to turn the Soundbar on, this indicator will illuminate to indicate the Soundbar is on. This indicator will remain on as long as an input signal is active. If the input becomes inactive the Soundbar will change to standby mode to conserve power and this indicator will turn off. FX SURROUND (FX) / STEREO (ST) Indicator The FX indicator lights up when FX Surround is selected. The ST indicator lights up when Stereo Mode is selected. This indicator will turn off after about 3 seconds from selecting the surround setting. MUTE ON Indicator This indicator lights up when mute is on. [. . . ] The bill of sale, receipt or receipted invoice must be presented as a pre-condition to obtaining limited warranty service. This limited warranty begins on the original date of purchase, and is valid only on Products purchased through HITACHI authorized dealers and used in the United States, Canada, and Puerto Rico by the original purchaser. To receive warranty service, the purchaser must contact the telephone number on this HITACHI limited product warranty statement for problem determination and service procedures. Warranty service may only be performed by a duly authorized HITACHI service center. [. . . ]