User manual HITACHI VT-MX410E(UK)

[. . . ] Owner's Manual Please read before using this product. IMPORTANT COPYRIGHT INFORMATION Unauthorised recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We do not take responsibility for the unauthorised duplication, use, or other acts which infringe upon the rights of copyright owners. A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. [. . . ] (This function will not operate for a NTSC tape. ) 3 Press the PLAY button to return to normal playback. To Monitor the progress of your Recording Select the video channel on the TV. Assemble Function · You can record in continuation from previous programme on a pre-recorded tape. Press the PLAY button to start playback. 2 Press the PAUSE/STILL button at the desired point on the tape. The VCR will be the Recording Pause mode. 4 Press the PROGRAM (o/p) buttons to select the channel to be recorded . 5 Press the REC/OTR or PAUSE/STILL button. 6 Press the STOP button when recording is completed. Still Picture Press the PAUSE/STILL button during playback to view a still picture on the TV screen. · When the picture begins to vibrate vertically, stabilize the picture by pressing the PROGRAM (o/p) buttons. · After the VCR has been in Still mode for 5 minutes, it will stop automatically to protect the tape and the video head. <Note for "Speed Search" and "Still Picture"> · Usually there will be video "noise" lines (black and white streaks or dots) on the screen. The still picture will, in addition to containing the "noise" lines, be black and white. This is not a fault of the machine but merely a by-product of the technology involved in producing a VCR with LP mode. 10 EN ADVANCED OPERATIONS Counter Memory This feature can be used to memorise a beginning point that you want to watch again. Rewinding or fast forwarding makes it easy to locate this point. NOTES: · If a tape includes programmes recorded in PAL and NTSC, the Counter Memory function may not operate correctly. · The COUNTER MEMORY button does not function if the Auto Repeat mode is set to ON. In this case, set the Auto Repeat mode to OFF. 2 Press the COUNTER RESET button to display 0:00:00. 3 Press the COUNTER MEMORY button so that "M" appears on the TV screen. · Press the STOP button when recording or playback is completed. The VCR will automatically stop when the counter returns to 0:00:00 (approx. ) TO EXIT THE COUNTER MEMORY Press the COUNTER MEMORY button so that "M" disappears from the TV screen. NOTE: When you set the Auto Repeat mode to ON while the Counter Memory mode is ON, the VCR exits the Counter Memory mode automatically. SET UP NOTES: · Once you select the Auto Repeat mode, it stays in effect even after you turn off VCR. · COUNTER MEMORY does not function if the Auto Repeat mode is set to ON. [. . . ] DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DON'T use makeshift stands and NEVER fix legs with wood screws -- to ensure complete safety always fix the manufacturer's approved stand or legs with the fixings provided according to the instructions. DON'T allow electrical equipment to be exposed to rain or moisture. [. . . ]