User manual HITACHI VTF641EUKN

[. . . ] 404-279-5600 QR12372 © Hitachi, Ltd. 1995 HITACHI SALES HITACHI (HSC) CORPORATION CANADA INC. 3219 Koapaka Street Pointe Honolulu, HI 96819 H9R1B1, CANADA Tel. 514-697-9150 Printed in Malaysia 1 FOR YOUR SAFETY TABLE OF CONTENTS FOR YOUR SAFETY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If noise bars appear on the TV screen during PAUSE mode, first set the VCR to SLOW mode and then press the 1 or 4 button on the remote control to minimize the noise bars. If the screen jitters during PAUSE, press either 1 or 4 button to minimize it. To resume play, press PLAY or PAUSE again. Frame Advance While in PAUSE mode during playback, press 9 button to view the video one frame at a time. Skip Playback While playing back your tape you can skip forward by pressing the 9 button. The tape will search ahead for about a minute and then resume playing. Slow Motion To slow the playback speed to exactly the pace you want, press PLAY, then then press 3 or 6 button. Press 6 to slow down, press 3 to speed up. The more times you press, the slower or faster the slow motion. 29 Basic Operations Use the 1 or 4 button to minimize any visual noise bands on the screen. After 5 minutes in slow motion playback, the VCR will stop the tape automatically to prevent damage to the tape and the VCR. Press DISPLAY to take the counter display off. The spot is still in memory until you set a new one or until the tape is ejected. Jump Forward or Backward with GO-TO Using the time counter, you can search for a spot a certain number of minutes before or after your current position on the tape. Press STOP, if tape is playing, and press DISPLAY, then press 8 button to bring up the Set Go-To Time screen: Select minutes by pressing buttons 0 to 9-one digit for hours, then two digits for minutes. If you enter a wrong digit, press CLEAR and enter the correct one. Then press F. FWD if you want to move that many minutes ahead, or REW if you want to move that many minutes backward. For example, say you want to review a scene that began about 2 minutes earlier in a video, press 0, 0 and 2 to display 0:02 on the screen. The tape rewinds to the place 2 minutes back from where you began, then starts playback automatically from that spot. Jump to an Index Mark with INDEX A quick way to access specific program segments is with the index search feature. This lets you move through a tape that has several recordings on it by searching for the INDEX "mark. " This function only works with recordings that have been set up with indexing. You create an INDEX mark every time you press the REC button while recording. [. . . ] H - This Protection Plan can be renewed as long as the request is made before the expiry date of the Plan. Hitachi, however, reserves the right to refuse any renewal. I - Hitachi reserves the right to cancel the Protection Plan in case of abuse by the owner, in such case, Hitachi will reimburse the owner the portion of the plan cost, based on the period used. J - This plan does not constitute an insurance policy. [. . . ]