User manual HITACHI VTFX795A

[. . . ] OWNER'S MANUAL If you need additional operating assistance after reading this owner's manual or to order replacement accessories, please call TOLL FREE : 1-800-448-2244. VIDEO CASSETTE RECORDER VT-FX795A TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read Instructions- All the safety and operating instructions should be read before the appliance is operated. [. . . ] Press [SEARCH MODE] so that the Index Search menu appears. INDEX SEARCH 03 1 2 3 1 2 3 Enter the number of recordings you wish to skip by pressing [PLAY] or [STOP] within 30 seconds. Search Functions Picture Search If you want to skip or repeat a scene during playback, press [F. FWD] or [REW]. · Press it again and the VCR will now search in super high speed. (in the LP/SLP modes only) Press [F. FWD] or [REW] to start index search. If you want to go in the forward direction, press [F. FWD]. If you want to go in the reverse direction, press [REW]. · After index search, the VCR will play the tape automatically. 1 2 3 RECORDING FUNCTION It may be unlawful to record copyrighted material without the consent of the copyright owner. Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record Record safety tab safety tab. To record on it later, cover the hole with cellophane tape. Before recording, make sure: · The desired channel is selected by pressing [Number] on the remote control or the ) ]. (If you connected the VCR to a [CHANNEL ( cable box or satellite box as in "VCR to TV Connection" on page 3, select the VCR to channel 3 or 4 the same channel as the RF output channel of the VCR. Then, select the channel you want to record at the cable box or satellite box. In this case, you can ONLY record and view the SAME channel. ) · There is a tape with its safety tab into the VCR. · The desired recording speed is selected in SP(standard play) or SLP(super long play) mode by pressing [SPEED] on the remote control. · TV STEREO or SAP is selected. Tape Speed Type of tape SP mode SLP mode T60 1hour 3hours Recording/Playback Time T120 2hours 6hours T160 2-2/3hours 8hours Time Search This feature allows you to go to a specific point on a tape by entering the exact amount of time you wish to skip in order to reach the point. Press [SEARCH MODE] twice so that the Time TIME SEARCH Search menu appears. 2 : 50 Enter your desired time to skip by pressing [PLAY] or [STOP] within 30 seconds. Press [F. FWD] or [REW] to start time search. If you want to go in the forward direction, press [F. FWD]. If you want to go in the reverse direction, press [REW]. · After time search, the VCR will play the tape automatically. 1 Viewing and Recording the Same Program Begin the recording by pressing [RECORD]. · To temporarily stop recording or resume it, press [PAUSE]. [. . . ] Botón de visualizador (DISPLAY) 5. Botón de reproducción (PLAY) 6. Botón de grabación (REC) 8. Botón del modo de búsqueda (SEARCH MODE) 9. [. . . ]