User manual HITACHI VTMX210EUK

[. . . ] USERS GUIDE VTMX210EUK Owner's Manual Please read before using this product. IMPORTANT COPYRIGHT INFORMATION Unauthorised recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We do not take responsibility for the unauthorised duplication, use, or other acts which infringe upon the rights of copyright owners. A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. [. . . ] After five minutes, the VCR will automatically switch to the Stop mode to prevent tape damage. 2 Press PAUSE/STILL or REC to resume recording. Recording one Programme while viewing another You can record one programme while viewing another. To start recording, follow steps 1 to 4 under "Viewing and Recording the same Programme". Then, set the TV to the channel you want to watch. Speed Search 1 During playback, press F. FWD/B or REW/s in the SP or LP modes to view a videotape at a high speed in either a forward or reverse direction. 2 Press the button again, the VCR will now search in super high speed. 3 Press PLAY to return to normal playback. To Monitor the progress of your Recording Select the video channel on the TV. Still Picture Press PAUSE/STILL during playback to view a still picture on the TV screen. · When the picture begins to vibrate vertically, stabilize the op picture by pressing CHANNEL (o/p) in the STILL mode. · After the VCR has been in Still mode for 5 minutes, it will stop automatically to protect the tape and the video head. <Note for "Speed search" and "Still Picture"> · Usually there will be video "noise" lines (black and white streaks or dots) on the screen. The still picture will, in addition to containing the "noise" lines, be black and white. This is not a fault of the machine but merely a by-product of the technology involved in producing a VCR with LP mode. Assemble Function · You can record in continuation from previous programme on a pre-recorded tape. 2 Press PAUSE/STILL at the desired point on the tape. The VCR will be the recording pause mode. op 4 Press CHANNEL (o/p) to select the channel to be recorded . 6 Press STOP when recording is completed. 10 EN ADVANCED OPERATIONS Counter Memory This feature can be used to memorize a beginning point that you want to watch again. Rewinding or fast forwarding makes it easy to locate this point. NOTES: · If a tape includes programmes recorded in PAL and NTSC, the Counter Memory function may not operate correctly. · COUNTER MEMORY does not function if the Auto Repeat mode is set to ON. In this case, set the Auto Repeat mode to OFF. 2 Press COUNTER RESET to display 0:00:00. 3 Press COUNTER MEMORY so that "M" appears on the TV screen. · Press STOP when recording or playback is completed. [. . . ] · Check the batteries in the remote control. · You cannot copy a copyrighted video tape. You are experiencing copy guard protection. Make your contribution to the environment!!!· Spent batteries do not belong in the dustbin. [. . . ]