User manual HOLMES HASF2009

[. . . ] If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty. If you have any other questions or comments, please write: The Holmes Group, Inc. Box 769, Milford, MA 01757-0769 or visit our website at www. holmesproducts. com For your own records, staple or attach your sales receipt to this manual. [. . . ] Do not allow the motor or other electrical components to be exposed to water. HASF2009KM. 01. US. OM1 HASF200901UM1 Printed In China PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using the appliance. 2) To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet. 3) Keep the cord out of heavy traffic areas. DO NOT let the cord hang over the edge of a table or counter. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiator, stoves, or heaters. 4) To protect against electrical hazards, DO NOT immerse in water or other liquids. 5) Close supervision is necessary when any appliance is used by or near children, or by disabled people. 6) Always unplug the fan before moving it, putting on or taking off parts, cleaning, or whenever the fan is not in use. Be sure to pull by the plug and not the cord. DO NOT operate without fan grills properly in place. 8) DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair. 9) DO NOT operate in the presence of explosive and/or flammable fumes. THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC (Alternating Current) PLUG (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY 10) Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by The Holmes Group may cause hazards. 13) Keep unit away from heated surfaces and open flames. 14) WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control device. 15) DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. [. . . ] Step 2: Insert the tilt adjustment knob into the neck joint and tighten in place. Figure 4 Base Base Assembly: You will need the base and four extension legs. Push in the small tab on each extension and snap into base. Figure 2 Tilt Adjustment: Follow these instructions to tilt the Fan Head for upward angle air movement. Step 1: To change the tilting angle of the fan head, simply loosen the Tilt Adjustment Knob (see fig. 1). Step 2: Move the fan head to the desired angle, then firmly tighten the knob to lock in place. Fan Head Assembly: You are now ready to assemble the fan head (See Figure #1) Step 1: Position the rear grill over the motor shaft, making certain the 2 notches at the top and bottom of the rear grill fit over the 2 prongs on the motor housing. [. . . ]