User manual HOLMES HASF99

[. . . ] 8) DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair. 9) DO NOT operate in the presence of explosive and/or flammable fumes. 10) Use appliance only for intended household use as described in this manual. [. . . ] Step 4: Insert the other pole with the threaded joint (male end) into the hollow end of the lower pole (female end), until both poles meet. Be careful to align the cutaway / grooves on the threaded joint (male end) with the two protruding pieces inside the hollow end of the lower pole (female end). Step 5: Turn the upper pole clockwise to lock it securely in place. CLEANING/MAINTENANCE Follow these instructions to correctly and safely care for your Holmes Power Stand Fan. Please remember: · Always unplug the fan before cleaning or disassembling. · Do not allow water to drip on or into the fan motor housing. · Do not use any of the following as a cleaner: gasoline, thinner, benzine. · We also recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that may have accumulated inside or on the unit Final Assembly Step 1: Insert the neck of the fan head into the hollow end of the pole and turn the neck clockwise to lock into place. OPERATING INSTRUCTIONS Step 1: Set the fan base on a dry, level surface. Step 2: Please make sure the On/Speed knob is in the "Off" or "0" position. Plug the cord into any standard 120-volt A/C outlet. Step 3: The SPEED is adjusted by moving the knob left or right to the desired setting. Step 4: The OSCILLATION control knob is located on the top of the fan motor housing. To start oscillation, push control knob down. To stop oscillation, pull control knob up. FAN STORAGE Your fan can be stored in the off-season either partially disassembled or assembled. It is important to keep it in a safe, dry location. · If stored disassembled, we recommend using the original (or appropriately sized) box. · If stored assembled or partially assembled, remember to protect the fan head from dust. ADJUSTMENT INSTRUCTIONS Height Adjustment This fan is equipped with two poles, which allow you to adjust the height of the fan for three height settings. Tilt Adjustment To change the tilting angle of the fan head, move the fan head to the desired angle. WA R R A N T Y I N F O R M AT I O N SERVICE INSTRUCTIONS 1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. If you have any questions regarding this unit's operation or believe any repair is necessary, please write to our consumer service department. If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty. If you have any other questions or comments, please write: The Holmes Group, Inc. Box 769, Milford, MA 01757-0769 or visit our website at www. holmesproducts. com For your own records, staple or attach your sales receipt to this manual. [. . . ] Carefully pack the item in its original carton or other suitable box to avoid damage in shipping. Before packing your unit for return; be sure to enclose: a) Your name, full address with zip code and telephone number, b) A dated sales receipt or PROOF OF PURCHASE, c) Your $7. 50 check for return packaging, and d) The model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to the unit before the box is sealed. ) 3. Holmes recommends you insure the package (as damage in shipment is not covered by your warranty). [. . . ]